In view of the characteristics of flow separation in the compressor cascade corner region, a new flow control method for installing little blades in the front of the cascade passage was proposed, which took into account the flow control advantages of end wall fences and vortex generators. Firstly, the little blades could hinder the cross flow on the end wall and the development of the horseshoe vortex pressure surface branch. Secondly, the little blades could generate induced vortices to take away the low-energy fluid near the end wall and the corner region.

Based on numerical simulations, the effects of different pitchwise positions, stagger angles and heights of the little blades on the aerodynamic performance of the cascade were studied, and the optimal little blades were obtained by NSGA-II using EBF neural network as the agent model. The results show that the little blades have the optimal pitchwise position, stagger angle and height range for improving the aerodynamic performance of the cascade. When the optimized little blades are introduced in the baseline cascade, the stable working range of the cascade is expanded, and the stall type of the cascade changes from the hub-corner stall to the overload of flow separation near the mid-span. At the near stall attack angle of the baseline, the total pressure loss coefficient is reduced by about 10.38% and the static pressure coefficient is increased by about 4.31%. Meanwhile, the loss of the lower span is decreased and the diffuser capacity of the whole span is improved. The passage secondary loss and wake loss are reduced because of the delay of corner separation. Moreover, the strength of the end wall vortex is weakened and the end wall vortex no longer develops as part of the passage vortex. The induced vortex, horseshoe vortex pressure surface branch and initial passage vortex develop into new passage vortex.

This content is only available via PDF.
You do not currently have access to this content.