The Japan Power Engineering and Inspection Corporation (JAPEIC) has been carrying out the project titled “Nuclear Power Plant Integrated Management Technology (PLIM)” consigned by Japanese Ministry of Economy, Trade and Industry (METI) since 1996FY as a 10-years project. As one of the project themes, development of reconstitution technology for reactor pressure vessel (RPV/RV) surveillance specimens, which are installed in RPVs to monitor the neutron irradiation embrittlement on RPV/RV materials, is now on being carried out to deal with the long-term operation of nuclear power plants. The target of this theme is to establish the technical standard for applicability of reconstituted surveillance specimens including the reconstitution of the Charpy specimens and Compact Tension (CT) specimens. With the Charpy specimen reconstitution, application of 10mm length inserts is used, which enables the conversion of tests from the LT-direction to the TL-direction. This paper presents the basic data from Charpy and CT specimens of RPV materials using the surveillance specimens obtained for un-irradiated materials including the following. 1) Reconstitution Technology of Charpy Specimens. a) The interaction between plastic zone and Heat Affected Zone (HAZ). b) The effects of the possible deviations from the standard specimens for the reconstituted specimens. 2) Reconstitution Technology of CT specimens. a) The correlation between fracture toughness and plastic zone width. Because the project is now in progress, this paper describes the outline of the results obtained as of the end of 2000 FY.
- Nuclear Engineering Division
Development of Reconstitution Technology for Surveillance Specimens
- Views Icon Views
- Share Icon Share
- Search Site
Atago, Y, Hatano, S, & Otsuka, E. "Development of Reconstitution Technology for Surveillance Specimens." Proceedings of the 10th International Conference on Nuclear Engineering. 10th International Conference on Nuclear Engineering, Volume 1. Arlington, Virginia, USA. April 14–18, 2002. pp. 367-373. ASME. https://doi.org/10.1115/ICONE10-22629
Download citation file: