With the latest advancements in three-dimensional (3D) measurement technologies, obtaining 3D point cloud data for inspection purposes in manufacturing is becoming more common. While 3D point cloud data allows for better inspection capabilities, their analysis is typically challenging. Especially with unstructured 3D point cloud data, containing coordinates at random locations, the challenges increase with higher levels of noise and larger volumes of data. Hence, the objective of this paper is to extend the previously developed Adaptive Generalized Likelihood Ratio (AGLR) approach to handle unstructured 3D point cloud data used for automated surface defect inspection in manufacturing. More specifically, the AGLR approach was implemented in a practical case study to inspect twenty-seven samples, each with a unique fault. These faults were designed to cover an array of possible faults having three different sizes, three different magnitudes, and located in three different locations. The results show that the AGLR approach can indeed differentiate between non-faulty and a varying range of faulty surfaces while being able to pinpoint the fault location. This work also serves as a validation for the previously developed AGLR approach in a practical scenario.
Automated Surface Inspection Using 3D Point Cloud Data in Manufacturing: A Case Study
- Views Icon Views
- Share Icon Share
- Search Site
Dastoorian, R, Elhabashy, AE, Tian, W, Wells, LJ, & Camelio, JA. "Automated Surface Inspection Using 3D Point Cloud Data in Manufacturing: A Case Study." Proceedings of the ASME 2018 13th International Manufacturing Science and Engineering Conference. Volume 3: Manufacturing Equipment and Systems. College Station, Texas, USA. June 18–22, 2018. V003T02A036. ASME. https://doi.org/10.1115/MSEC2018-6542
Download citation file: