A fan-folded piezoelectric energy harvester is designed to generate electricity using heartbeat vibrations. This energy harvester consists of several bimorph beams stacked on top of each other making a fan-folded shape. Each beam has a brass substrate and two piezoelectric patches attached on both sides of it. These beams are connected to each other by rigid beams. One end of the device is clamped to the wall and the other end is free to vibrate. A tip mass is placed at the free end to enhance the output power of the device and reduce the natural frequency of the system.

High natural frequency is one major concern about the microscaled energy harvesters. The size for this energy harvester is 1 cm by 1 cm by 1 cm, which makes the natural frequency very high. By utilizing the fan-folded geometry and adding tip mass and link mass to the configuration, this natural frequency is reduced to the desired range.

The generated electricity can be used to power up a pacemaker. If enough electricity is generated, the pacemaker operates without having a battery and the patient does not need to have a surgery every seven to ten years to have the battery replaced. The power needed for a pacemaker to operate is about 1 microwatt. In this paper, the natural frequencies and mode shapes of fan-folded energy harvesters with added tip mass and link mass are analytically derived. The electro-mechanical coupling has been included in the model and the expression for the multi-mode power frequency response function is calculated.

This content is only available via PDF.
You do not currently have access to this content.