Fracture initiated at a corner between two different isotropic materials is considered. A “small” crack, well within the region dominated by the asymptotic stress fields of the noncracked corner, is modeled and the stress intensities associated with the tip of the small crack are determined. Different criteria for the direction of crack propagation are studied.
Issue Section:
Technical Papers
1.
Andersson
B.
Falk
U.
Babuska
I.
von Petersdorff
T.
1995
, “Reliable Stress and Fracture Mechanics Analysis of Complex Components Using a h-p Version of FEM
,” International Journal for Numerical Methods in Engineering
, Vol. 38
, pp. 2135
–2163
.2.
Bogy
D. B.
1968
, “Edge-Bonded Dissimilar Orthogonal Elastic Wedges Under Normal and Shear Loading
,” ASME JOURNAL OF APPLIED MECHANICS
, Vol. 35
, pp. 460
–466
.3.
Bogy
D. B.
1971
, “Two Edge-Bonded Elastic Wedges of Different Materials and Wedge Angles Under Surface Tractions
,” ASME JOURNAL OF APPLIED MECHANICS
, Vol. 38
, pp. 377
–386
.4.
Bogy
D. B.
Wang
K. C.
1971
, “Stress singularities at interface corners in bonded dissimilar isotropic elastic materials
,” Int. J. Solids Structures
, Vol. 7
, pp. 993
–1005
.5.
Carpinteri
A.
1987
, “Stress-Singularity and Generalized Fracture Toughness at the Vertex of Re-Entrant Corners
,” Eng. Fract. Mech.
, Vol. 26
, No. 1
, pp. 143
–155
.6.
Dundurs
J.
1968
, “Analogy between Concentrated Forces and Edge Dislocations
,” Journal of Applied Physics
, Vol. 39
, No. 9
, pp. 4152
–4156
.7.
Dundurs, J., 1969, “Elastic Interaction of Dislocations With lnhomogeneities,” Mathematical Theory of Dislocations, ASME, New York.
8.
Erdogan
F.
Sih
G. C.
1963
, “On the crack extension in plates under plane loading and transverse shear
,” J. Bas. Engng.
, Vol. 85
, pp. 519
–527
.9.
Grenestedt
J. L.
Hallstro¨m
S.
Kuttenkeuler
J.
1996
, “On Cracks Emanating from Wedges in Expanded PVC Foam
,” Eng. Fract. Mech.
, Vol. 54
, No. 4
, pp. 445
–456
.10.
Hallstro¨m, S., and Grenestedt, J. L., 1996, “Mixed Mode Fracture of Cracks and Wedge Shaped Notches in Expanded PVC Foam,” International Journal of Fracture, accepted for publication.
11.
Hein
V. L.
Erdogan
F.
1971
, “Stress singularities in a two-material wedge
,” Int. J. Fracture Mech.
, Vol. 7
, pp. 317
–330
.12.
Hutchinson
J. W.
Mear
M. E.
Rice
J. R.
1987
, “Cracks Paralleling an Interface Between Dissimilar Materials
,” ASME JOURNAL OF APPLIED MECHANICS
, Vol. 54
, pp. 828
–832
.13.
Hutchinson, J. W., and Suo, Z., 1991, “Mixed Mode Cracking in Layered Materials,” Advances in Applied Mechanics, Vol. 29.
14.
Leicester, R. H., 1969, “The Size Effect of Notches,” Proc. 2nd Australasian Conf. Mech. of Structures and Materials, pp. 4.1–4.20.
15.
Lin
K. Y.
Hartmann
H. H.
1989
, “Numerical analysis of stress singularities at a bonded anisotropic wedge
,” Eng. Fract. Mech.
, Vol. 32
, pp. 211
–224
.16.
Malyshev
B. M.
Salganik
R. L.
1965
, “The strength of adhesive joints using the theory of cracks
,” Int. J. Fracture Mech.
, Vol. 1
, pp. 114
–128
.17.
Melin
S.
1994
, “Accurate Data for Stress Intensity Factors at Infinitesimal Kinks
,” ASME JOURNAL OF APPLIED MECHANICS
, Vol. 61
, pp. 467
–470
.18.
Seweryn
A.
1994
, “Brittle Fracture Criterion for Structures with Sharp Notches
,” Eng. Fract. Mech.
, Vol. 47
, No. 5
, pp. 673
–681
.19.
Sjo¨gren, J., Celsing, C.-G., Olsson, K.-A., Levander, C.-G., and Hellbratt, S.-E., 1984, “Swedish Development of MCMV Hull Design and Production,” Proc. RINA Symp., London.
20.
Theocaris
P. S.
1974
, “The order of singularity at a multi-wedge corner of a composite plate
,” Int. J. Engng. Sci.
, Vol. 12
, pp. 107
–120
.21.
Williams
M. L.
1952
, “Stress Singularities Resulting from Various Boundary Conditions in Angular Plates in Extension
,” ASME JOURNAL OF APPLIED MECHANICS
, Vol. 19
, pp. 526
–528
.
This content is only available via PDF.
Copyright © 1997
by The American Society of Mechanical Engineers
You do not currently have access to this content.
