The finite element method is employed in this paper to investigate free-vibration problems of a spinning stepped Timoshenko beam consisting of a series of uniform segments. Each uniform segment is considered a substructure which may be modeled using beam finite elements of uniform cross section. Assembly of global equation of motion of the entire beam is achieved using Lagrange’s multiplier method. The natural frequencies and mode shapes are subsequently reduced with the help of linear transformations to a standard eigenvalue problem for which a set of natural frequencies and mode shapes may be easily obtained. Numerical results for an overhung stepped beam consisting of three uniform segments are obtained and presented as an illustrative example. [S00021-8936(01)00101-5]
Skip Nav Destination
Article navigation
December 2000
Brief Notes
Free Vibration of a Spinning Stepped Timoshenko Beam
S. D. Yu, Assistant Professor, Mem. ASME,,
S. D. Yu, Assistant Professor, Mem. ASME,
Department of Mechanical Engineering, Ryerson Polytechnic University, 350 Victoria Street, Toronto, ON M5B 2K3, Canada
Search for other works by this author on:
W. L. Cleghorn, Professor,
W. L. Cleghorn, Professor,
Department of Mechanical and Industrial Engineering, University of Toronto, Five King’s College Road, Toronto, ON M5S 3G8, Canada
Search for other works by this author on:
S. D. Yu, Assistant Professor, Mem. ASME,
Department of Mechanical Engineering, Ryerson Polytechnic University, 350 Victoria Street, Toronto, ON M5B 2K3, Canada
W. L. Cleghorn, Professor,
Department of Mechanical and Industrial Engineering, University of Toronto, Five King’s College Road, Toronto, ON M5S 3G8, Canada
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received and accepted by the ASME Applied Mechanics Division, Sept. 1, 1999; final revision, Apr. 10, 2000. Associate Technical Editor: N. C. Perkins.
J. Appl. Mech. Dec 2000, 67(4): 839-841 (3 pages)
Published Online: April 10, 2000
Article history
Received:
September 1, 1999
Revised:
April 10, 2000
Citation
Yu , S. D., and Cleghorn , W. L. (April 10, 2000). "Free Vibration of a Spinning Stepped Timoshenko Beam ." ASME. J. Appl. Mech. December 2000; 67(4): 839–841. https://doi.org/10.1115/1.1331282
Download citation file:
Get Email Alerts
Hamiltonian System-Based Symplectic Framework for Analytical Vibration Analysis of Microplates
J. Appl. Mech (December 2024)
Related Articles
Eigenfrequencies of an Arbitrarily Supported Beam Carrying Multiple In-Span Elastic Rod-Mass Systems
J. Vib. Acoust (December,2008)
Vibrations of an Incompressible Linearly Elastic Plate Using Discontinuous Finite Element Basis Functions for Pressure
J. Vib. Acoust (October,2019)
A Linearized Theory on Ground-Based Vibration Response of Rotating Asymmetric Flexible Structures
J. Vib. Acoust (June,2006)
Related Proceedings Papers
Related Chapters
Transverse Free Vibration Analysis of Hybrid SPR Steel Joints
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Approximate Analysis of Plates
Design of Plate and Shell Structures
Finite Element Modeling and Analysis of Vibration-Assisted Machining
Vibration Assisted Machining: Theory, Modelling and Applications