The fracture behavior of polycrystalline silicon in the presence of atomically sharp cracks is important in the determination of the mechanical reliability of microelectromechanical system (MEMS) components. The mode-I critical stress intensity factor and crack tip displacements in the vicinity of atomically sharp edge cracks in polycrystalline silicon MEMS scale specimens were measured via an in situ atomic force microscopy/digital image correlation method. The effective (macroscopic) mode-I critical stress intensity factor for specimens from different fabrication runs was , where is the standard deviation that was attributed to local cleavage anisotropy and grain boundary effects. The experimental near crack tip displacements were in good agreement with the linearly elastic fracture mechanics solution, which supports dominance in polysilicon at the scale of a few microns. The mechanical characterization method implemented in this work allowed for direct experimental evidence of incremental (subcritical) crack growth in polycrystalline silicon that occurred with crack increments of . The variation in experimental effective critical stress intensity factors and the incremental crack growth in brittle polysilicon were attributed to local cleavage anisotropy in individual silicon grains where the crack tip resided and whose fracture characteristics controlled the overall fracture process resulting in different local and macroscopic stress intensity factors.
Skip Nav Destination
e-mail: chasioti@uiuc.edu
Article navigation
September 2006
Technical Papers
Fracture Toughness and Subcritical Crack Growth in Polycrystalline Silicon
I. Chasiotis,
I. Chasiotis
Aerospace Engineering,
e-mail: chasioti@uiuc.edu
University of Illinois at Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
S. W. Cho,
S. W. Cho
Materials Science and Engineering,
University of Virginia
, Charlottesville, VA 22904
Search for other works by this author on:
K. Jonnalagadda
K. Jonnalagadda
Aerospace Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
I. Chasiotis
Aerospace Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801e-mail: chasioti@uiuc.edu
S. W. Cho
Materials Science and Engineering,
University of Virginia
, Charlottesville, VA 22904
K. Jonnalagadda
Aerospace Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801J. Appl. Mech. Sep 2006, 73(5): 714-722 (9 pages)
Published Online: December 10, 2005
Article history
Received:
March 30, 2005
Revised:
December 10, 2005
Citation
Chasiotis, I., Cho, S. W., and Jonnalagadda, K. (December 10, 2005). "Fracture Toughness and Subcritical Crack Growth in Polycrystalline Silicon." ASME. J. Appl. Mech. September 2006; 73(5): 714–722. https://doi.org/10.1115/1.2172268
Download citation file:
Get Email Alerts
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Deformation-Dependent Effective Vascular Permeability of a Biological Tissue Containing Parallel Microvessels
J. Appl. Mech (January 2025)
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Related Articles
Device Process Integration: A New Device Fabrication Approach
J. Med. Devices (June,2010)
Erratum: “Plane-Strain Propagation of a Fluid-Driven Fracture: Small Toughness Solution” [ Journal of Applied Mechanics, 2005, 72(6), pp. 916–928 ]
J. Appl. Mech (July,2007)
Adhesion and Reliability of Polymer/Inorganic Interfaces
J. Electron. Packag (December,1998)
Arterial Stiffness: Different Metrics, Different Meanings
J Biomech Eng (September,2019)
Related Proceedings Papers
Related Chapters
Applications of Elastic-Plastic Fracture Mechanics in Section XI, ASME Code Evaluations
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes
Effects of Solute Hydrogen on the Toughness of Polycrystalline Silicon
International Hydrogen Conference (IHC 2012): Hydrogen-Materials Interactions
Impact Testing
A Quick Guide to API 510 Certified Pressure Vessel Inspector Syllabus