The effect of mineral volume fraction on the tensile mechanical properties of cortical bone tissue is investigated by theoretical and experimental means. The mineral content of plexiform, bovine bone was lowered by 18% and 29% by immersion in fluoride solutions for 3 days and 12 days, respectively. The elastic modulus, yield strength and ultimate strength of bone tissue decreased, while the ultimate strain increased with a decrease in mineral content. The mechanical behavior of bone tissue was modeled by using a micro-mechanical shear lag theory consisting of overlapped mineral platelets reinforcing the organic matrix. The decrease in yield stress, by the 0.002 offset method, of the fluoride treated bones were matched in the theoretical curves by lowering the shear yield stress of the organic matrix. The failure criterion used was based on failure stresses determined from a failure envelope (Mohr’s circle), which was constructed using experimental data. It was found that the model predictions of elastic modulus got worse with a decrease in mineral content (being 7.9%, 17.2% and 33.0% higher for the control, 3-day and 12-day fluoride-treated bones). As a result, the developed theory could not fully predict the yield strain of bones with lowered mineral content, being 12.9% and 21.7% lower than the experimental values. The predicted ultimate stresses of the bone tissues with lower mineral contents were within ±10% of the experimental values while the ultimate strains were 12.7% and 26.3% lower than the experimental values. Although the model developed in this study did not take into account the presence of hierarchical structures, voids, orientation of collagen molecules and micro cracks, it still indicated that the mechanical properties of the organic matrix depend on bone mineral content.
Skip Nav Destination
Article navigation
December 2003
Technical Papers
Effect of Bone Mineral Content on the Tensile Properties of Cortical Bone: Experiments and Theory
S. P. Kotha,
S. P. Kotha
University of Medicine and Dentistry of New Jersey, SOM, Department of Osteosciences/Biomechanics, PCC Suite 102, Stratford, NJ 08084-1504
Search for other works by this author on:
N. Guzelsu
N. Guzelsu
UMDNJ-SOM, Department of Osteosciences/Biomechanics, PCC Suite 102, Stratford, NJ 08084-1504 Phone: (856) 566-2731 Fax: (856) 566-2733
Search for other works by this author on:
S. P. Kotha
University of Medicine and Dentistry of New Jersey, SOM, Department of Osteosciences/Biomechanics, PCC Suite 102, Stratford, NJ 08084-1504
N. Guzelsu
UMDNJ-SOM, Department of Osteosciences/Biomechanics, PCC Suite 102, Stratford, NJ 08084-1504 Phone: (856) 566-2731 Fax: (856) 566-2733
J Biomech Eng. Dec 2003, 125(6): 785-793 (9 pages)
Published Online: January 9, 2004
Article history
Online:
January 9, 2004
Citation
Kotha, S. P., and Guzelsu, N. (January 9, 2004). "Effect of Bone Mineral Content on the Tensile Properties of Cortical Bone: Experiments and Theory ." ASME. J Biomech Eng. December 2003; 125(6): 785–793. https://doi.org/10.1115/1.1631586
Download citation file:
Get Email Alerts
Optimal Control Formulation for Manual Wheelchair Locomotion Simulations: Influence of Anteroposterior Stability
J Biomech Eng (November 2023)
Related Articles
Sensitivity of Multiple Damage Parameters to Compressive Overload in
Cortical Bone
J Biomech Eng (August,2005)
Elastic Deformation of Mineralized Collagen Fibrils: An Equivalent Inclusion Based Composite Model
J Biomech Eng (June,2005)
Response to Comment by Charles W. McCutchen
J Biomech Eng (August,2004)
Determining Effective Centroid Position in Biomechanical Testing: A Technique for Simplifying Whole Bone Analysis
J Biomech Eng (October,2005)
Related Proceedings Papers
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Flexibility Analysis
Process Piping: The Complete Guide to ASME B31.3, Third Edition
Novel and Efficient Mathematical and Computational Methods for the Analysis and Architecting of Ultralight Cellular Materials and their Macrostructural Responses
Advances in Computers and Information in Engineering Research, Volume 2