Cable transmission has significant advantages in the development of a surgical robot which is fully magnetic resonance imaging (MRI) compatible and can work dexterously in the very limited space inside MRI core. However, apart from the nonlinearities due to friction and cable compliance present in the traditional steel cables, the MRI compatible polymeric cables also suffer from the significant viscoelastic behavior. Previous work in cable-conduit actuation modeling only addresses the transmission in elastic cables and ignores complex direction and time dependent nonlinear viscoelastic behavior of cable-conduits. These effects need to be characterized for system design and nonlinearity compensation. In this paper, an analytical model using standard linear solid model and Coulomb friction is developed to study the transmission characteristics of such a system. The model has been validated by experiments using dyneema cables passing through PEEK conduits, predicting motion and torque transmission with error levels of 3.38% and 16.16%, respectively. The effect of cable viscoelasticity is studied utilizing the model, and corresponding results are compared with that of an elastic cable.
Skip Nav Destination
Article navigation
September 2013
Research-Article
Modeling of Viscoelastic Cable-Conduit Actuation for MRI Compatible Systems
William J. Peine
William J. Peine
Search for other works by this author on:
Contributed by the Dynamic Systems Division of ASME for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received June 4, 2012; final manuscript received March 6, 2013; published online May 23, 2013. Assoc. Editor: Won-jong Kim.
J. Dyn. Sys., Meas., Control. Sep 2013, 135(5): 051004 (9 pages)
Published Online: May 23, 2013
Article history
Received:
June 4, 2012
Revision Received:
March 6, 2013
Citation
Agrawal, V., Yao, B., and Peine, W. J. (May 23, 2013). "Modeling of Viscoelastic Cable-Conduit Actuation for MRI Compatible Systems." ASME. J. Dyn. Sys., Meas., Control. September 2013; 135(5): 051004. https://doi.org/10.1115/1.4024079
Download citation file:
Get Email Alerts
Cited By
A Method for Designing of Hydraulic Actuators Using Digital Hydraulic Pump and Multi-Chamber Cylinder
J. Dyn. Sys., Meas., Control
A Method for Robust Partial Quadratic Eigenvalue Assignment with Repeated Eigenvalues
J. Dyn. Sys., Meas., Control
Designing Hybrid Neural Network Using Physical Neurons - A Case Study of Drill Bit-Rock Interaction Modeling
J. Dyn. Sys., Meas., Control
Linear Quadratic Regulator for Delayed Systems Using the Hamiltonian Approach and Exact Closed-Loop Poles for First-Order Systems
J. Dyn. Sys., Meas., Control (July 2023)
Related Articles
Noncontact Displacement Measurement of Nuclear Waste Canisters in a Geological Disposal by Using an Electromagnetic-Wave Approach
ASME J of Nuclear Rad Sci (October,2020)
Plastic Collapse of Stainless Steel Optical Tubes Used in Steel Armored Cables
J. Mech. Des (June,2000)
Application of Wireless Technologies in a Nuclear Plant: Evaluation of Electromagnetic Propagation With Different Computational Techniques
ASME J of Nuclear Rad Sci (April,2020)
Related Proceedings Papers
Related Chapters
Application in Estimating Cable Force
Computer Vision for Structural Dynamics and Health Monitoring
Introduction
Mechanics of Drillstrings and Marine Risers
3D Modeling and Simulation for Flexible Cable
International Conference on Advanced Computer Theory and Engineering (ICACTE 2009)