The attempt to develop a railway vehicle that can operate in the 150 to 300-mph(240 to 480-km/h) speed regime is seriously hampered by the problems of ride comfort, curve negotiation, and “hunting.” This latter phenomena involves sustained lateral oscillations that occur above certain critical forward velocities and cause large dynamic loads between the wheels and track as well as contributing to passenger discomfort. This paper presents results of an initial effort to solve these problems by utilizing optimization procedures to design a high speed railway vehicle. This study indicates that the problem is more easily treated as a constrained optimization problem than as an unconstrained problem with several terms in the objective function. In the constrained optimization problem, the critical “hunting” speed was maximized subject to constraints on 1) the acceleration of the car body, 2) the suspension stroke length, and 3) the maximum suspension stroke while negotiating a curve. A simple, three degree-of-freedom model of the rail vehicle was used for this study. Solutions of this constrained problem show that beyond a minimum yaw stiffness between truck and car body the operating speed remains nearly constant. Thus, above this value, the designer may trade off yaw stiffness, wheel tread conicity and stability margin.
Skip Nav Destination
Article navigation
September 1975
Research Papers
Lateral Dynamics Optimization of a Conventional Railcar
N. K. Cooperrider,
N. K. Cooperrider
Arizona State University, Tempe, Ariz.
Search for other works by this author on:
J. J. Cox,
J. J. Cox
USAF; Dept. of Engineering Mechanics, Materials and Measurements, Arizona State University, Tempe, Ariz.
Search for other works by this author on:
J. K. Hedrick
J. K. Hedrick
Massachusetts Institute of Technology, Cambridge, Mass.
Search for other works by this author on:
N. K. Cooperrider
Arizona State University, Tempe, Ariz.
J. J. Cox
USAF; Dept. of Engineering Mechanics, Materials and Measurements, Arizona State University, Tempe, Ariz.
J. K. Hedrick
Massachusetts Institute of Technology, Cambridge, Mass.
J. Dyn. Sys., Meas., Control. Sep 1975, 97(3): 293-299 (7 pages)
Published Online: September 1, 1975
Article history
Received:
April 7, 1975
Online:
July 13, 2010
Citation
Cooperrider, N. K., Cox, J. J., and Hedrick, J. K. (September 1, 1975). "Lateral Dynamics Optimization of a Conventional Railcar." ASME. J. Dyn. Sys., Meas., Control. September 1975; 97(3): 293–299. https://doi.org/10.1115/1.3426935
Download citation file:
Get Email Alerts
Cited By
Offline and Online Exergy-Based Strategies for Hybrid Electric Vehicles
J. Dyn. Sys., Meas., Control (May 2025)
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control
A Distributed Layered Planning and Control Algorithm for Teams of Quadrupedal Robots: An Obstacle-Aware Nonlinear Model Predictive Control Approach
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-Enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control (May 2025)
Related Articles
An Active Suspension System Design for the Lateral Dynamics of a High-Speed Wheel-Rail System
J. Dyn. Sys., Meas., Control (December,1971)
A New Dynamic Model of High-Speed Railway Vehicle Moving on Curved Tracks
J. Vib. Acoust (February,2008)
Rail Passenger Vehicle Lateral Dynamic Performance Improvement Through Active Control
J. Dyn. Sys., Meas., Control (December,1978)
Lateral Dynamics of a Rail Transit Vehicle: A Comparison of Experimental and Theoretical Results
J. Dyn. Sys., Meas., Control (March,1981)
Related Proceedings Papers
Related Chapters
Practical Applications
Robust Control: Youla Parameterization Approach
Intuitive Optimization
Engineering Optimization: Applications, Methods, and Analysis
Rationale for Human-Powered Vehicle Design and Use
Design of Human Powered Vehicles