Skip Nav Destination
Issues
May 2005
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Paper
Effect of Operating Parameters on the DMFC Performance
J. Fuel Cell Sci. Technol. May 2005, 2(2): 81–85.
doi: https://doi.org/10.1115/1.1840887
Alloy Effect on the Reversible Potential of OOH(ads) Formation from relative to Pt(111)
J. Fuel Cell Sci. Technol. May 2005, 2(2): 86–93.
doi: https://doi.org/10.1115/1.1867972
Topics:
Alloys
,
Chromium alloys
,
Electrons
,
Heat losses
,
Overvoltage
,
Platinum alloys
,
Skin
,
Surface science
,
Water
Dynamic Modeling on the Hybrid Molten Carbonate Fuel Cell-Gas Turbine Bottoming Cycle
J. Fuel Cell Sci. Technol. May 2005, 2(2): 94–98.
doi: https://doi.org/10.1115/1.1867973
Topics:
Compressors
,
Cycles
,
Dynamic response
,
Fuel cells
,
Fuels
,
Gas turbines
,
Hybrid power systems
,
Molten carbonate fuel cells
,
Turbines
,
Generators
Comparison of Methodologies for Determination of Fracture Strength of Yttria-Stabilized Zirconia Electrolyte Materials
J. Fuel Cell Sci. Technol. May 2005, 2(2): 99–103.
doi: https://doi.org/10.1115/1.1867974
Topics:
Disks
,
Electrolytes
,
Finite element analysis
,
Fracture toughness
,
Pressure
,
Stress
,
Stress concentration
,
Testing
,
Solid oxide fuel cells
,
Displacement
A New PtRu Anode Formed by Thermal Decomposition for the Direct Method Fuel Cell
J. Fuel Cell Sci. Technol. May 2005, 2(2): 104–110.
doi: https://doi.org/10.1115/1.1867975
Topics:
Anodes
,
Catalysts
,
Fuel cells
,
Methanol
,
Oxidation
,
Titanium
,
Direct methanol fuel cells
,
Carbon
,
Electrodes
,
Electrochemical impedance spectroscopy
Discharge of a Segmented Polymer Electrolyte Membrane Fuel Cell
J. Fuel Cell Sci. Technol. May 2005, 2(2): 111–120.
doi: https://doi.org/10.1115/1.1867977
Optimization of the Operating Parameters of a Proton Exchange Membrane Fuel Cell for Maximum Power Density
J. Fuel Cell Sci. Technol. May 2005, 2(2): 121–135.
doi: https://doi.org/10.1115/1.1867978
Topics:
Anodes
,
Catalysts
,
Electrodes
,
Membranes
,
Optimization
,
Power density
,
Proton exchange membrane fuel cells
,
Temperature
,
Fuel cells
,
Design
Application of an Anode Model to Investigate Physical Parameters in an Internal Reforming Solid-Oxide Fuel Cell
J. Fuel Cell Sci. Technol. May 2005, 2(2): 136–140.
doi: https://doi.org/10.1115/1.1895925
Topics:
Anodes
,
Solid oxide fuel cells
,
Electrodes
Technical Brief
Efficient Parallel Simulation of Direct Methanol Fuel Cell Models
J. Fuel Cell Sci. Technol. May 2005, 2(2): 141–144.
doi: https://doi.org/10.1115/1.1840866
Topics:
Direct methanol fuel cells
,
Fuel cells
,
Modeling
,
Simulation
,
Computation
,
Parallel processing
Email alerts
RSS Feeds
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
Joint Model Parameter Identification and EKF Algorithm for the SOC Estimation of LFP Battery
J. Electrochem. En. Conv. Stor