Skip Nav Destination
Issues
May 2006
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Analysis of Chemically Reacting Transport Phenomena in an Anode Duct of Intermediate Temperature SOFCs
J. Fuel Cell Sci. Technol. May 2006, 3(2): 89–98.
doi: https://doi.org/10.1115/1.2173662
Analysis, Modeling, and Validation for the Thermal Dynamics of a Polymer Electrolyte Membrane Fuel Cell System
J. Fuel Cell Sci. Technol. May 2006, 3(2): 99–110.
doi: https://doi.org/10.1115/1.2173663
Heat Exchangers for Fuel Cell and Hybrid System Applications
J. Fuel Cell Sci. Technol. May 2006, 3(2): 111–118.
doi: https://doi.org/10.1115/1.2173665
Stresses in Proton Exchange Membranes Due to Hygro-Thermal Loading
J. Fuel Cell Sci. Technol. May 2006, 3(2): 119–124.
doi: https://doi.org/10.1115/1.2173666
The Electrochemical Performance of Anode-Supported SOFCs with LSM-Type Cathodes Produced by Alternative Processing Routes
J. Fuel Cell Sci. Technol. May 2006, 3(2): 125–130.
doi: https://doi.org/10.1115/1.2173667
Topics:
Anodes
,
Solid oxide fuel cells
,
Tape casting
,
Temperature
,
Grain size
,
Pressing
Development of High Performance Micro DMFCS and a DMFC Stack
J. Fuel Cell Sci. Technol. May 2006, 3(2): 131–136.
doi: https://doi.org/10.1115/1.2173668
A Thermodynamic Analysis of Electricity and Hydrogen Co-Production Using a Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol. May 2006, 3(2): 137–143.
doi: https://doi.org/10.1115/1.2173669
Topics:
Cycles
,
Exergy
,
Fuel cells
,
Fuels
,
Hydrogen
,
Hydrogen production
,
Solid oxide fuel cells
,
Steam
,
Steam reforming
,
Combustion chambers
Dynamic Simulation of an Integrated Solid Oxide Fuel Cell System Including Current-Based Fuel Flow Control
J. Fuel Cell Sci. Technol. May 2006, 3(2): 144–154.
doi: https://doi.org/10.1115/1.2174063
Topics:
Flow (Dynamics)
,
Flow control
,
Fuel cells
,
Fuels
,
Hydrogen
,
Simulation
,
Solid oxide fuel cells
,
Temperature
,
Transients (Dynamics)
,
Heat transfer
The Thermodynamic Evaluation and Optimization of Fuel Cell Systems
J. Fuel Cell Sci. Technol. May 2006, 3(2): 155–164.
doi: https://doi.org/10.1115/1.2174064
Entropy Based Design of Fuel Cells
J. Fuel Cell Sci. Technol. May 2006, 3(2): 165–174.
doi: https://doi.org/10.1115/1.2174065
Topics:
Electrodes
,
Entropy
,
Fuel cells
,
Proton exchange membrane fuel cells
,
Fuels
,
Solid oxide fuel cells
,
Design
Hydrogen Production From Methane by Using Oxygen Permeable Ceramics
J. Fuel Cell Sci. Technol. May 2006, 3(2): 175–179.
doi: https://doi.org/10.1115/1.2174066
Topics:
Ceramics
,
Density
,
Methane
,
Oxygen
,
Membranes
,
Electrical conductivity
,
Hydrogen production
Lattice Boltzmann Simulations of Bubble Dynamics at the Anode of a
J. Fuel Cell Sci. Technol. May 2006, 3(2): 180–187.
doi: https://doi.org/10.1115/1.2174067
To Achieve the Best Performance Through Optimization of Gas Delivery and Current Collection in Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. May 2006, 3(2): 188–194.
doi: https://doi.org/10.1115/1.2174068
Fuel Cell Hybrids, Their Thermodynamics and Sustainable Development
J. Fuel Cell Sci. Technol. May 2006, 3(2): 195–201.
doi: https://doi.org/10.1115/1.2174069
Topics:
Entropy
,
Fuel cells
,
Fuels
,
Heat
,
Sustainable development
,
Flow (Dynamics)
,
Temperature
,
Heat engines
,
Transportation systems
,
Solid oxide fuel cells
Dynamic Characteristics of a Direct Methanol Fuel Cell
J. Fuel Cell Sci. Technol. May 2006, 3(2): 202–207.
doi: https://doi.org/10.1115/1.2174070
Topics:
Cycles
,
Direct methanol fuel cells
,
Dynamic response
,
Oxygen
,
Temperature
,
Stress
,
Flow (Dynamics)
Effect of Various Electrolyte Compositions on the Degradation in Molten Carbonates
J. Fuel Cell Sci. Technol. May 2006, 3(2): 208–212.
doi: https://doi.org/10.1115/1.2174071
Topics:
Electrolytes
,
Temperature
,
Carbon dioxide
Hydrogen Production Performance of a 10-Cell Planar Solid-Oxide Electrolysis Stack
J. Fuel Cell Sci. Technol. May 2006, 3(2): 213–219.
doi: https://doi.org/10.1115/1.2179435
Topics:
Electrolysis
,
Hydrogen
,
Hydrogen production
,
Solid oxide fuel cells
,
Steam
,
Temperature
,
Flow (Dynamics)
,
Current density
,
Electrodes
,
Stainless steel
Technical Brief
Semiempirical Model for Determining PEM Electrolyzer Stack Characteristics
J. Fuel Cell Sci. Technol. May 2006, 3(2): 220–223.
doi: https://doi.org/10.1115/1.2174072
Topics:
Anodes
,
Current density
,
Electrical conductivity
,
Membranes
,
Proton exchange membranes
,
Temperature
,
Pressure
,
Electrodes
,
Curve fitting
Email alerts
RSS Feeds
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)