The movement to light-emitting diode (LED) lighting systems worldwide is accelerating quickly as energy savings and reduction in hazardous materials increase in importance. Government regulations and rapidly lowering prices help to further this trend. Today's strong drive is to replace light bulbs of common outputs (60 W, 75 W, and 100 W) without resorting to compact fluorescent (CFL) bulbs containing mercury while maintaining the standard industry bulb size and shape referred to as A19. For many bulb designs, this A19 size and shape restriction forces a small heat sink which is barely capable of dissipating heat for 60 W equivalent LED bulbs with natural convection for today's LED efficacies. 75 W and 100 W equivalent bulbs require larger sizes, some method of forced cooling, or some unusual liquid cooling system; generally none of these approaches are desirable for light bulbs from a consumer point of view. Thus, there is interest in developing natural convection cooled A19 light bulb designs for LEDs that cool far more effectively than today's current designs. Current A19 size heat sink designs typically have thermal resistances of 5–7 °C/W. This paper presents designs utilizing the effects of chimney cooling, well developed for other fields that reduce heat sink resistances by significant amounts while meeting all other requirements for bulb system design. Numerical studies and test data show performance of 3–4 °C/W for various orientations including methods for keeping the chimney partially active in horizontal orientations. Significant parameters are also studied with effects upon performance. The simulations are in good agreement with the experimental data. Such chimney-based designs are shown to enable 75 W and 100 W equivalent LED light bulb designs critical for faster penetration of LED systems into general lighting applications.
Skip Nav Destination
Article navigation
December 2014
Research-Article
Advanced Natural Convection Cooling Designs for Light-Emitting Diode Bulb Systems
James Petroski
James Petroski
Search for other works by this author on:
James Petroski
Contributed by the Electronic and Photonic Packaging Division of ASME for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received September 17, 2013; final manuscript received August 15, 2014; published online September 19, 2014. Assoc. Editor: Y. C. Lee.
J. Electron. Packag. Dec 2014, 136(4): 041005 (8 pages)
Published Online: September 19, 2014
Article history
Received:
September 17, 2013
Revision Received:
August 15, 2014
Citation
Petroski, J. (September 19, 2014). "Advanced Natural Convection Cooling Designs for Light-Emitting Diode Bulb Systems." ASME. J. Electron. Packag. December 2014; 136(4): 041005. https://doi.org/10.1115/1.4028331
Download citation file:
Get Email Alerts
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Related Articles
Performance of Hybrid Fin Heat Sinks for Thermal Control of Light Emitting Diode Lighting Modules
J. Electron. Packag (March,2014)
Foreword
J. Heat Transfer (January,2005)
A Theoretical Investigation Into the Optimal Longitudinal Profile of
a Horizontal Pin Fin of Least Material Under the Influence of Pure Forced and
Pure Natural Convection With a Diameter-Variable Convective Heat Transfer
Coefficient
J. Heat Transfer (August,2006)
Merits of Employing Foam Encapsulated Phase Change Materials for Pulsed Power Electronics Cooling Applications
J. Electron. Packag (June,2008)
Related Proceedings Papers
Related Chapters
Air Cooling and Heat Sinks
Thermal Management of Telecommunication Equipment, Second Edition
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment, Second Edition
Thermoelectric Coolers Are Hot
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong