... in the J ournal of E nergy R esources T echnology . 30 12 2023 30 03 2024 02 04 2024 03 05 2024 Graphical Abstract Figure diesel engine medium speed numerical simulation combustion characteristics pollutant spatiotemporal distribution Internal...

...Shi Pengsheng; Zhang Tianyou; Yang Weijuan; Zhou Zhijun; Zhou Junhu; Liu Jianzhong Moderate or intense low-oxygen dilution (MILD) combustion is a promising combustion technology widely recognized by the international combustion community. In this study, numerical simulation was used to investigate...

...-sectional area, and filling ratio of thermoelectric legs on TEM performance were investigated through numerical simulations and compared with findings from previous studies. It was observed that increasing the cross-sectional area of the thermoelectric legs led to a decrease in the power output of TEM...

...@qq.com Contributed by the Advanced Energy Systems Division of ASME for publication in the J ournal of E nergy R esources T echnology . 29 03 2023 26 07 2023 30 07 2023 11 12 2023 soot particles diffusion flame numerical simulation blending ratio synergistic...

...Kai Sun; Xiangyun Liu; Tingyu Ao; Liangde Liu; Zhu Liang This paper studies different experimental conditions for a 25t/h industrial boiler fueled with nature gas. In the meanwhile, numerical simulation is carried out using the commercial software of fluent . The different excess air coefficients...

...A. Anderson; L. Karthikeyan; Dillip K. Sahoo; M. Mallika; S. Prakash Utilization of numerical simulations has been increased rapidly to test many innovative concepts in the field of advanced fuel technologies. Implementation of chemical compound's interaction is viable option by numerical tools...

... of salt rock. Based on the long-term creep numerical simulation, the influences of interlayer number, interlayer thickness, interlayer dip angle, interlayer stiffness, cavern spacing, and cavern pressure difference on the deformation of caverns and stability performance of UGS are studied. The results...

... Contributed by the Advanced Energy Systems Division of ASME for publication in the J ournal of E nergy R esources T echnology . 25 11 2022 02 02 2023 02 02 2023 02 03 2023 fractal permeability pore geometry parameters CBM migration coupled model numerical simulation...

... . 10.1021/ie801818n [5] Arhuoma , M. , Yang , D. , Dong , M. , Li , H. , and Idem , R. , 2009 , “ Numerical Simulation of Displacement Mechanisms for Enhancing Heavy Oil Recovery During Alkaline Flooding ,” Energy Fuels , 23 ( 12 ), pp. 5995 – 6002 . 10.1021/ef900690y...

... and timeline of the numerical simulation of this work are depicted in Fig. S1 (available in the Supplemental Materials on the ASME Digital Collection). First, the model is constructed with its mesh created by ICEM CFD 14.0. Prior to the formal reaction case simulation, the cold case simulation without...

...] Ren , F. , Li , Z. , Liu , G. , Chen , Z. , and Zhu , Q. , 2011 , “ Numerical Simulation of Flow and Combustion Characteristics in a 300 MWe Down-Fired Boiler With Different Overfire Air Angles ,” Energy Fuels , 25 ( 4 ), pp. 1457 – 1464 . 10.1021/ef101664m [17...

... of hydrate decomposition based on the law of conservation of mass, conservation of energy, and phase equilibrium, Hydrateressim (HRS) is used to carry out the numerical simulation of the front edge of the one-dimensional model. The results show the pressure and the hydrate saturation front are correlated...

... . 27 02 2021 09 07 2021 11 07 2021 04 08 2021 wave rotor response surface optimization numerical simulation model reduction shaft work energy conversion/systems National Natural Science Foundation of China 10.13039/501100001809 22078040 The performance...

... in the surrounding rock temperature is an important and easily overlooked factor among many reasons. In this research, we used methods that include experiment and numerical simulation to study the characteristic law of the borehole deformation induced by the changes in the surrounding rock temperature of deep CBM...

... system (EEGS). However, zero CO 2 production has not been achieved during the process of EEGS. To this end, numerical models of EEGS in abandoned oil reservoirs configured with vertical wells were established in the present study. Numerical simulations in different well configurations were conducted...

... the potential influencing factors and the flowback behavior in shale gas reservoirs. This study is based on experimental observations and numerical simulations. In the experiments, the flowback process was simulated through a gas displacement experiment, and the cores were scanned simultaneously to obtain...

... multihole spray fuel injection strategies numerical simulation fuel combustion With increasingly stringent emission regulations and energy-saving requirements, the development of efficient and clean technologies for gasoline engines has attracted much attention. Gasoline direct injection (GDI...

..., with the advancement in computer technology, the use of computational fluid dynamics (CFD) methodology for studying SCPP has become an extensive, robust, and powerful technique. In light of the above, in this study, numerical simulations of an SCPP through three-dimensional axisymmetric modeling is performed...

... of ASME for publication in the J ournal of E nergy R esources T echnology . 17 03 2020 14 04 2020 16 04 2020 12 06 2020 heavy oil enhanced oil recovery in situ combustion carbon dioxide numerical simulation fuel combustion petroleum engineering It is known...

... , thus being a more efficient extinguishing agent. The above findings were rationalized by numerical simulations, which revealed that whereas N 2 extinguished the flame mainly by dilution of reactive intermediates, C 3 H 2 F 6 decomposed to produce F-containing species that competed with coal for OH, H...