The objective of this investigation was to characterize the high-pressure vaporization processes of engine fuels, which are too complex in composition to be described with conventional methods. To do so a comprehensive model was developed for the transient vaporization process of droplets of practical engine fuels using continuous thermodynamics in which high-pressure effects are fully considered. Transport equations are derived in a spherical coordinate system for the semi-continuous systems of both gas and liquid phases. A general treatment of vapor-liquid equilibrium is presented, which can be applied with any type of cubic equation of state. Relations for the properties of the continuous species are formulated. The model is further applied to calculate the transient high-pressure vaporization processes of droplets of representative engine fuels—diesel and gasoline. The high-pressure vaporization processes of droplets of two single-component fuels are also predicted for comparison. The results clarify the characteristics of the vaporization processes of engine fuel droplets and indicate the significant effects of fuel type on the vaporization behavior. The comparison with the results of the single-component cases also emphasizes the importance of considering the influence of multicomponent fuels in practical applications.
Skip Nav Destination
Article navigation
April 2001
Technical Papers
Engine Fuel Droplet High-Pressure Vaporization Modeling
G.-S. Zhu,
G.-S. Zhu
Engine Research Center University of Wisconsin—Madison, 1500 Engineering Drive, Madison, WI 53706
Search for other works by this author on:
R. D. Reitz
R. D. Reitz
Engine Research Center University of Wisconsin—Madison, 1500 Engineering Drive, Madison, WI 53706
Search for other works by this author on:
G.-S. Zhu
Engine Research Center University of Wisconsin—Madison, 1500 Engineering Drive, Madison, WI 53706
R. D. Reitz
Engine Research Center University of Wisconsin—Madison, 1500 Engineering Drive, Madison, WI 53706
Contributed by the Internal Combustion Engine Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received by the ICE Division July 11, 2000; final revision received by the ASME Headquarters Dec. 6, 2000. Associate Editor: D. Assanis.
J. Eng. Gas Turbines Power. Apr 2001, 123(2): 412-418 (7 pages)
Published Online: December 6, 2000
Article history
Received:
July 11, 2000
Revised:
December 6, 2000
Citation
Zhu , G., and Reitz, R. D. (December 6, 2000). "Engine Fuel Droplet High-Pressure Vaporization Modeling ." ASME. J. Eng. Gas Turbines Power. April 2001; 123(2): 412–418. https://doi.org/10.1115/1.1361058
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Multicomponent and High-Pressure Effects on Droplet Vaporization
J. Eng. Gas Turbines Power (April,2002)
A Model for Droplet Vaporization for Use in Gasoline and HCCI Engine Applications
J. Eng. Gas Turbines Power (April,2004)
Approximate Analysis of Thermal Radiation Absorption in Fuel
Droplets
J. Heat Transfer (September,2007)
On the Theoretical Prediction of Fuel Droplet Size Distribution in Nonreactive Diesel Sprays
J. Fluids Eng (March,2002)
Related Proceedings Papers
Related Chapters
Physiology of Human Power Generation
Design of Human Powered Vehicles
Temperature and Pressure Effects on Cavitation Erosion in Diesel-Like Fuels
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Introduction I: Role of Engineering Science
Fundamentals of heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines