In the most evolved designs, it is common practice to expose engine components to main annulus air temperatures exceeding the thermal material limit in order to increase the overall performance and to minimize the engine-specific fuel consumption (SFC). To prevent overheating of the materials and thus the reduction of the component life, an internal flow system is required to cool the critical engine parts and to protect them. This paper shows a practical application and extension of the methodology developed during the five-year research program, main annulus gas path interaction (MAGPI). Extensive use was made of finite element analysis (FEA (solids)) and computational fluid dynamics (CFD (fluid)) modeling techniques to understand the thermomechanical behavior of a dedicated turbine stator well cavity rig, due to the interaction of cooling air supply with the main annulus. Previous work based on the same rig showed difficulties in matching predictions to thermocouple measurements near the rim seal gap. In this investigation, two different types of turbine stator well geometries were analyzed, where—in contrast to previous analyses—further use was made of the experimentally measured radial component displacements during hot running in the rig. The structural deflections were applied to the existing models to evaluate the impact inflow interactions and heat transfer. Additionally, to the already evaluated test cases without net ingestion, cases simulating engine deterioration with net ingestion were validated against the available test data, also taking into account cold and hot running seal clearances. 3D CFD simulations were conducted using the commercial solver fluent coupled to the in-house FEA tool SC03 to validate against available test data of the dedicated rig.
Skip Nav Destination
Article navigation
April 2017
Research-Article
Structural Deflection's Impact in Turbine Stator Well Heat Transfer
Harvey M. Thompson,
Harvey M. Thompson
Professor of Computational Fluid Dynamics
School of Mechanical Engineering,
University of Leeds,
Leeds LS2 9JT, UK
School of Mechanical Engineering,
University of Leeds,
Leeds LS2 9JT, UK
Search for other works by this author on:
Antonio Guijarro Valencia,
Antonio Guijarro Valencia
ETSIA,
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Search for other works by this author on:
Gregorio López Juste,
Gregorio López Juste
ETSIA,
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Search for other works by this author on:
Vincenzo Fico,
Vincenzo Fico
Thermo-Fluid Systems,
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Search for other works by this author on:
Gary A. Clayton
Gary A. Clayton
Thermo-Fluid Systems,
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Search for other works by this author on:
Julien Pohl
Harvey M. Thompson
Professor of Computational Fluid Dynamics
School of Mechanical Engineering,
University of Leeds,
Leeds LS2 9JT, UK
School of Mechanical Engineering,
University of Leeds,
Leeds LS2 9JT, UK
Antonio Guijarro Valencia
ETSIA,
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Gregorio López Juste
ETSIA,
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Universidad Politécnica de Madrid,
Madrid 28040, Spain
Vincenzo Fico
Thermo-Fluid Systems,
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Gary A. Clayton
Thermo-Fluid Systems,
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Rolls-Royce plc.,
Derby DE24 8BJ, UK
Contributed by the Heat Transfer Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received June 29, 2016; final manuscript received August 9, 2016; published online October 18, 2016. Editor: David Wisler.
J. Eng. Gas Turbines Power. Apr 2017, 139(4): 041901 (10 pages)
Published Online: October 18, 2016
Article history
Received:
June 29, 2016
Revised:
August 9, 2016
Citation
Pohl, J., Thompson, H. M., Guijarro Valencia, A., López Juste, G., Fico, V., and Clayton, G. A. (October 18, 2016). "Structural Deflection's Impact in Turbine Stator Well Heat Transfer." ASME. J. Eng. Gas Turbines Power. April 2017; 139(4): 041901. https://doi.org/10.1115/1.4034636
Download citation file:
Get Email Alerts
Cited By
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Innovative Turbine Stator Well Design Using a Kriging-Assisted Optimization Method
J. Eng. Gas Turbines Power (July,2017)
Turbine Stator Well CFD Studies: Effects of Coolant Supply Geometry on Cavity Sealing Performance
J. Turbomach (April,2011)
Numerical Investigations of Flows and Heat Transfer in Turbine Disk Cavities
J. Eng. Gas Turbines Power (October,2024)
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
List of Commercial Codes
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Microstructure Evolution and Physics-Based Modeling
Ultrasonic Welding of Lithium-Ion Batteries