Microchannel surfaces, often machined to 20 to 1000 μm in width and depth, are employed in high-heat-flux applications. However, a large number of variables, control the two-phase flow heat transfer coefficient. The pressure, the surface heat flux, and the mass flux significantly affect the thermal transport. Experiments were conducted on a setup that was built for testing microchannel heat exchanges. The parameters considered in the study are power input: 20 to 300 W, volume flow rate: 35 to 300 ml/min, quality: 0 to 0.5, inlet subcooling: 5 to 15°C. The results indicate that the heat transfer coefficient and pressure drop are functions of the flow quality, the mass flux, and, of course, the heat flux and the related surface superheat. The heat transfer coefficient decreases from a value of 12,000 W/m2-K to 9000, W/m2-K at 80°C, when the wall superheat is increased from 10 to 80°C. The coefficient decreases by 30 percent when the exit vapor quality is increased from 0.01 to 0.65.
Skip Nav Destination
Article navigation
Research Papers
Impact of Channel Geometry on Two-Phase Flow Heat Transfer Characteristics of Refrigerants in Microchannel Heat Exchangers
T. S. Ravigururajan
T. S. Ravigururajan
Department of Mechanical Engineering, Wichita State University, Wichita, KS 67260
Search for other works by this author on:
T. S. Ravigururajan
Department of Mechanical Engineering, Wichita State University, Wichita, KS 67260
J. Heat Transfer. May 1998, 120(2): 485-491 (7 pages)
Published Online: May 1, 1998
Article history
Received:
September 13, 1996
Revised:
February 23, 1998
Online:
December 5, 2007
Citation
Ravigururajan, T. S. (May 1, 1998). "Impact of Channel Geometry on Two-Phase Flow Heat Transfer Characteristics of Refrigerants in Microchannel Heat Exchangers." ASME. J. Heat Transfer. May 1998; 120(2): 485–491. https://doi.org/10.1115/1.2824274
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Convective Boiling of R-134a Near the Micro-Macroscale Transition Inside a Vertical Brazed Plate Heat Exchanger
J. Heat Transfer (September,2018)
Hydrocarbon Refrigerant Vaporization Inside a Brazed Plate Heat Exchanger
J. Heat Transfer (October,2012)
Evaporation Heat Transfer and Pressure Drop of Refrigerant R-410A Flow in a Vertical Plate Heat Exchanger
J. Heat Transfer (October,2003)
A Natural Circulation Model of the Closed Loop, Two-Phase Thermosyphon for Electronics Cooling
J. Heat Transfer (October,2002)
Related Proceedings Papers
Related Chapters
Heat Transfer and Pressure Drop Correlations for Compact Heat Exchangers with Multi-Region Louver Fins
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Techniques to Reduce Exchanger or System Cost
Heat Exchanger Engineering Techniques
Thermal Design Guide of Liquid Cooled Systems
Thermal Design of Liquid Cooled Microelectronic Equipment