...André Damiani Rocha; Antonio Garrido Gallego The oil-water-gas separation is a critical aspect of the treatment of production flows in the oil industry. The segregation of gas bubbles and/or water droplets dispersed in viscous oil by an in-line swirling flow separator has been considered by the oil...

... characteristics were dominated by turning, impinging, and swirling flow, induced by the matrix channel geometry. Average heat/mass transfer coefficients on the leading and trailing surfaces in the stationary channel were approximately 2.1 times greater than those in a smooth channel. In the rotating cases...

... chemically reactive flow computational fluid dynamics confined flow dissociation finite difference methods finite volume methods heat radiation hydrogen nucleation swirling flow temperature distribution two-phase flow computational flow dynamics solar reactor carbon seeding solar cracking...

... distribution is divided into three peripherally closed-isothermal lines regions in radial direction r = 40 – 60   m . Flow visualization ( Sw = 1.08 ) ( a ) swirl flow at the nozzle exit and ( b ) flow across the flow passage Figures 5a 5b show the flow...

...F. Bishara; M. A. Jog; R. M. Manglik 28 05 2009 flow simulation heat transfer pipe flow swirling flow 2009 American Society of Mechanical Engineers ...

...Ashis K. Mazumder; Sujoy K. Saha The thermohydraulic performance of turbulent flow of air through rectangular and square ribbed ducts with twisted-tape inserts has been experimentally studied. The performance is influenced by the twisted-tape-generated swirl flow and the boundary layer separation...

... and decaying swirl flow in the short-length twisted tapes case. The flow characteristics are governed by twist ratio, space ratio, and length of twisted tape, Reynolds number, Prandtl number, rod-to-tube diameter ratio, duct aspect ratio, rib height, and rib spacing. Correlations developed for friction factor...

... with air temperature. 12 05 2004 25 07 2005 coal pulverised fuels combustion chemically reactive flow pipe flow heat transfer irreversible thermodynamics two-phase flow flow separation swirling flow combustion energy exergy heat transfer pulverized coal second law...

.... 04 03 2004 04 03 2005 jets cooling solar radiation heat radiation aerodynamics nozzles confined flow swirling flow mass transfer computational fluid dynamics flow simulation Solar Thermal Electricity Solar Receiver External Window Cooling Air Jet Cooling of a Concave...

... and Bergles ( 15 ) that the friction factor and the Nusselt number can be correlated by the swirl parameter Sw. For flows with high Gr or Ra and weak swirl flow effects, buoyancy-driven free convection appears. The secondary motions due to centrifugal and buoyancy forces are not complementary, and they tend...

... flow flow instability swirling flow jets shear flow flow separation bifurcation pipe flow Flow separation in internal flow and its subsequent reattachment, caused by sudden changes in geometry, occur in many engineering applications where heating or cooling is required...

...Lanchao Lin; Rengasamy Ponnappan Tiny nozzles are developed that are capable of creating the swirling flow necessary to generate a full cone spray. Eight miniature nozzles are embedded in a multi-nozzle plate used to generate a spray array for the cooling of high heat flux laser diodes. The target...

... 2004 rods (structures) forced convection confined flow turbulence swirling flow Bundles Enhancement Forced Convection Heat Transfer Swirling The core of a pressurized water reactor is constructed from an array of nuclear fuel rods positioned by support grids. Forced...

.... Vanka. 13 March 2002 05 February 2003 17 07 2003 swirling flow pipe flow heat transfer thermal diffusivity Annular Flow Computational Forced Convection Heat Transfer Turbulence An effect of promoting the turbulent transport of heat and momentum...

...S. K. Saha; A. Dutta Heat transfer and pressure drop characteristics in a circular tube fitted with twisted tapes have been investigated experimentally. Laminar swirl flow of a large Prandtl number 205 < Pr < 518 viscous fluid was considered. The swirl was generated by short-length twisted...

... swirling flow channel flow aerodynamics flow measurement Forced Convection Heat Transfer Impingement Swirling Turbines The test section is made of Plexiglas © so that a semi-infinite solid assumption can be applied on the test section wall. The local air bulk temperature for each axial...

...A. G. Patil Results of an experimental investigation of heat transfer and flow friction of a generalized power-law fluid in tape generated swirl flow inside a 25.0 mm i.d. circular tube, are presented. In order to reduce excessive pressure drops associated with full width twisted tapes, with less...

...Hui-Ying Wu; Hui-Er Cheng; Ren-Jun Shuai; Qiang-Tai Zhou Decaying swirl flow can enhance the heat transfer inside a tube. For the decaying swirl flow of which maximum tangential velocity is located in the immediate vicinity of the wall, an analytical model based on the fluid theorem about...