This paper investigates the manufacturability limits of fin aspect ratios within two-fluid counter-flow microchannel arrays based on the stress state between laminae during diffusion bonding. In prior papers, it has been shown that the diffusion bonding of two-fluid systems by microlamination can result in regions of the device that do not directly transmit bonding pressure and, consequently, result in unbonded regions leading to device leakage. A finite element model is used to analyze the stress state between laminae during diffusion bonding. The stress state is used to determine the critical stress necessary for diffusion bonding to occur in areas not receiving direct bonding pressure. Model results are compared with experimental results over a wide range of counter-flow geometries. It has been found generally that a compressive stress state must exist in every part of the geometry in order to produce leak-free bonds. Implications of this finding on the design of two-fluid microchannel arrays are discussed.

1.
Little
,
W. A.
, 1990, “
Microminiature Refrigerators for Joule-Thomson Cooling of Electronic Chips and Devices
,”
Adv. Cryog. Eng.
0065-2482,
33
, pp.
1325
1333
.
2.
Benson
,
R. S.
, and
Ponton
,
J. W.
, 1993, “
Process Miniaturization—A Route To Total Environmental Acceptability?
Trans. Inst. Chem. Eng., Part A
0263-8762,
A71
, pp.
160
168
.
3.
Koeneman
,
P. B.
,
Busch-Vishniac
,
I. J.
, and
Wood
,
K. L.
, 1997, “
Feasibility of Micro Power Supplies for MEMS
,”
J. Microelectromech. Syst.
1057-7157,
6
(
4
), pp.
355
362
.
4.
Brooks
,
K. P.
,
Martin
,
P. M.
,
Drost
,
M. K.
, and
Call
,
C. J.
, 1999, “
Mesoscale Combustor/Evaoprator Development
,”
ASME IMECE Conference
,
Nashville
, TN, pp.
37
43
.
5.
Peng
,
X. F.
,
Wang
,
B. X.
,
Peterson
,
G. P.
, and
Ma
,
H. B.
, 1995, “
Experimental Investigation of Heat Transfer in Flat Plates with Rectangular Mcrochannels
,”
Int. J. Heat Mass Transfer
0017-9310,
38
(
1
), pp.
127
137
.
6.
Wang
,
J. H.
,
Yeh
,
H. Y.
, and
Shyu
,
R. J.
, 1991, “
Thermal-Hydraulic Characteristic of Microheat Exchangers
,”
ASME J. Dyn. Syst., Meas., Control
0022-0434
32
, pp.
331
339
.
7.
Friedrich
,
C. R.
, and
Kang
,
S. D.
, 1994, “
Microheat Exchangers Fabricated by Diamond Machining
,”
Precis. Eng.
0141-6359,
16
(
1
), pp.
56
59
.
8.
Paul
,
B. K.
, and
Peterson
,
R. B.
, 1999, “
Microlamination for Microtechnology-based Energy, Chemical, and Biological Systems
,” ASME IMECE, Nashville, Tennessee, November 15–20, pp.
45
52
.
9.
Martin
,
P. M.
,
Bennett
,
W. D.
, and
Johnson
,
J. W.
, 1996, “
Microchannel Heat Exchangers for Advanced Climate Control
,”
Proc. SPIE
0277-786X,
2639
, pp.
82
88
.
10.
Matson
,
D. W.
,
Martin
,
P. M.
,
Bennett
,
W. D.
,
Stewart
,
D. C.
, and
Johnson
,
J. W.
, 1997, “
Laser Micromachined Microchannel Solvent Separator
,”
Proc. SPIE
0277-786X,
3223
, pp.
253
259
.
11.
Matson
,
D. W.
,
Martin
,
P. M.
,
Tonkovich
,
A. Y.
, and
Roberts
,
G. L.
, 1998, “
Fabrication of a Stainless Steel Microchannel Microcombustor Using a Lamination Process
,”
Proc. SPIE
0277-786X,
3514
, pp.
386
392
.
12.
Tonkovich
,
A. Y.
,
Zilka
,
J. L.
,
LaMont
,
M. J.
,
Wang
,
Y.
, and
Wegeng
,
R. S.
, 1999, “
Microchannel Reactors for Fuel Processing Applications
,”
Chem. Eng. Sci.
0009-2509,
54
(
13
), pp.
2947
2951
.
13.
Paul
,
B. K.
, and
Terhaar
,
T.
, 2000, “
Comparison of Two Passive Microvalve Designs for Microlamination Architectures
,”
J. Micromech. Microeng.
0960-1317,
10
, pp.
15
20
.
14.
Martin
,
P. M.
,
Matson
,
D. W.
,
Bennett
,
W. D.
, and
Hammerstrom
,
D. J.
, 1998, “
Fabrication of plastic microfluidic components
,”
Proc. SPIE
0277-786X,
3515
, pp.
172
176
.
15.
Paul
,
B. K.
,
Peterson
,
R. B.
, and
Wattanutchariya
,
W.
, 1999, “
The Effect of Shape Variation on the Performance of High-Aspect-Ratio, Metal Microchannel Arrays
,” IMRET 3:
Proceedings of the Third International Conference on Microreaction Technology
,
Springer
,
New York
, pp.
53
61
.
16.
Wegeng
,
R. S.
,
Call
,
C. J.
, and
Drost
,
M. K.
, 1996, “
Chemical Systems Miniaturization
,”
AIChE Spring Meeting
, New Orleans.
17.
Kakac
,
S.
, and
Liu
,
H.
, 1997,
Heat Exchangers-Selection, Rating, and Thermal Design
,
CRC Press
,
Boca Raton
.
18.
Kanlayasiri
,
K.
, and
Paul
,
B. K.
, 2004, “
A Nickel Aluminide Microchannel Array Heat Exchanger for High-Temperature Applications
,”
J. Manuf. Process.
1526-6125
6
(
1
), pp.
17
25
.
19.
Paul
,
B. K.
,
Hasan
,
H.
,
Thomas
,
J.
,
Wilson
,
R.
, and
Alman
,
D.
, 2001, “
Limits on Aspect Ratio in Two-fluid Micro-scale Heat Exchangers
,”
Transactions of NAMRC XXIX
,
Gainesville
, FL.
You do not currently have access to this content.