Skip Nav Destination
Issues
November 1967
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
In this Issue
Foreword
Tribute to Den Hartog
J. Eng. Ind. November 1967, 89(4): 581.
doi: https://doi.org/10.1115/1.3610112
Research Papers
Deceleration of an Unbalanced Rotor Through a Critical Speed
J. Eng. Ind. November 1967, 89(4): 582–585.
doi: https://doi.org/10.1115/1.3610113
Topics:
Rotors
,
Bending (Stress)
,
Damping
,
Deflection
Mass-Spring-Damper Response to Repetitive Impact
J. Eng. Ind. November 1967, 89(4): 587–596.
doi: https://doi.org/10.1115/1.3610116
Topics:
Dampers
,
Springs
,
Computational methods
,
Equations of motion
,
Experimental methods
An Approximate Normal Mode Method for Damped Lumped Parameter Systems
J. Eng. Ind. November 1967, 89(4): 597–604.
doi: https://doi.org/10.1115/1.3610117
Topics:
Computers
,
Dampers
,
Damping
,
Frequency response
,
Lumped parameter models
,
Random excitation
,
White noise
Torsional Vibration Analysis of a Hydrodynamic Split Torque Transmission
J. Eng. Ind. November 1967, 89(4): 605–610.
doi: https://doi.org/10.1115/1.3610118
Topics:
Torque
,
Vibration analysis
,
Engines
,
Torque converters
,
Computers
,
Damping
,
Diesel engines
,
Dynamometers
,
Equations of motion
,
Planetary gears
Natural Frequencies in Annuli With Induced Thermal Membrane Stresses
J. Eng. Ind. November 1967, 89(4): 611–617.
doi: https://doi.org/10.1115/1.3610119
Transition Mechanisms Attendant to Large Amplitude Parametric Vibrations of Rectangular Plates
J. Eng. Ind. November 1967, 89(4): 619–625.
doi: https://doi.org/10.1115/1.3610122
Topics:
Plates (structures)
,
Vibration
,
Oscillations
,
Stress
Statistical Energy Analysis of Vibrating Systems
J. Eng. Ind. November 1967, 89(4): 626–632.
doi: https://doi.org/10.1115/1.3610123
Topics:
Complex systems
,
Random vibration
,
Vibration
Composite Damping of Vibrating Sandwich Beams
J. Eng. Ind. November 1967, 89(4): 633–638.
doi: https://doi.org/10.1115/1.3610124
Topics:
Composite materials
,
Damping
Use of Mass as a Perturbation Parameter in Vibrations
J. Eng. Ind. November 1967, 89(4): 639–644.
doi: https://doi.org/10.1115/1.3610125
Topics:
Displacement
,
Eigenvalues
,
Excitation
,
Linear vibration
,
Polynomials
,
Vibration
On the Critical Speeds of a Continuous Shaft-Disk System
J. Eng. Ind. November 1967, 89(4): 645–652.
doi: https://doi.org/10.1115/1.3610126
Topics:
Disks
,
Whirls
,
Bearings
,
Elasticity
An Investigation of an Impact Vibration Absorber
J. Eng. Ind. November 1967, 89(4): 653–657.
doi: https://doi.org/10.1115/1.3610127
Topics:
Vibration absorbers
,
Containers
,
Cycles
,
Displacement
,
Resonance
,
Stability
,
Steady state
Damping in Sandwich Beams With Shear-Flexible Cores
J. Eng. Ind. November 1967, 89(4): 662–670.
doi: https://doi.org/10.1115/1.3610130
Topics:
Damping
,
Shear (Mechanics)
,
Free vibrations
,
Glass
,
Honeycomb structures
,
Aluminum
,
Epoxy adhesives
,
Epoxy resins
,
Foundry coatings
,
Geometry
Torsional Instability of Fully Stalled Airfoil (or Supercavitating Hydrofoil)
J. Eng. Ind. November 1967, 89(4): 671–680.
doi: https://doi.org/10.1115/1.3610131
Topics:
Airfoils
,
Hydrofoil
,
Flutter (Aerodynamics)
,
Flow (Dynamics)
,
Oscillations
,
Rotation
,
Aircraft
,
Blades
,
Chords (Trusses)
,
Compressors
The Influence of Internal Friction on the Stability of High Speed Rotors
J. Eng. Ind. November 1967, 89(4): 683–688.
doi: https://doi.org/10.1115/1.3610135
Topics:
Internal friction
,
Rotors
,
Stability
Nonsynchronous Response of a Pivoted-Pad Gas Bearing
J. Eng. Ind. November 1967, 89(4): 689–696.
doi: https://doi.org/10.1115/1.3610136
Topics:
Gas bearings
Instability of Oil Bearings Due to High Oil Viscosity
J. Eng. Ind. November 1967, 89(4): 697–704.
doi: https://doi.org/10.1115/1.3610137
Topics:
Bearings
,
Viscosity
,
Elasticity
,
Rotors
,
Temperature
,
Vibration
The Gyroscopic Vibration Absorber
J. Eng. Ind. November 1967, 89(4): 706–712.
doi: https://doi.org/10.1115/1.3610140
Topics:
Vibration absorbers
,
Disks
,
Equations of motion
,
Excitation
,
Machinery
,
Vehicles
,
Vibration
,
Weight (Mass)
On Precession and Critical Speeds of Two-Bearing Machines With Overhung Weight
J. Eng. Ind. November 1967, 89(4): 713–718.
doi: https://doi.org/10.1115/1.3610141
Topics:
Bearings
,
Machinery
,
Weight (Mass)
,
Inertia (Mechanics)
,
Rotors
,
Shear deformation
The Design and Evaluation of a Supercritical-Speed Helicopter Power-Transmission Shaft
J. Eng. Ind. November 1967, 89(4): 719–727.
doi: https://doi.org/10.1115/1.3610142
Topics:
Design
,
Dampers
,
Aluminum
,
Engineering design processes
,
Rotors
,
Tubing
,
Vibration
,
Wall thickness
Resonance Characteristics of Unidirectional Viscous and Coulomb-Damped Vibration Isolation Systems
J. Eng. Ind. November 1967, 89(4): 729–740.
doi: https://doi.org/10.1115/1.3610145
The Electrodynamic Vibration Absorber as a Passive or Active Device
J. Eng. Ind. November 1967, 89(4): 741–753.
doi: https://doi.org/10.1115/1.3610146
Topics:
Circuits
,
Construction
,
Control systems
,
Dampers
,
Damping
,
Electric current
,
Feedback
,
Machinery
,
Magnetic fields
,
Magnification
Spatial Response Concentrations in Extended Structures
J. Eng. Ind. November 1967, 89(4): 754–758.
doi: https://doi.org/10.1115/1.3610147
Topics:
Excitation
,
Mode shapes
,
Noise (Sound)
,
Probability
,
Resonance
,
Statistical distributions
,
Theorems (Mathematics)
,
Vibration
Vibratory Penetration of Soils
J. Eng. Ind. November 1967, 89(4): 759–765.
doi: https://doi.org/10.1115/1.3610148
Topics:
Computers
,
Coulombs
,
Damping
,
Design
,
Earth resistance
,
Friction
,
Soil
,
Weight (Mass)
Vibration Analysis of Shells Using Discrete Mass Techniques
J. Eng. Ind. November 1967, 89(4): 766–771.
doi: https://doi.org/10.1115/1.3610149
Topics:
Shells
,
Vibration analysis
,
Cylinders
,
Stiffness
,
Thin shells
A Quantitative Evaluation of Constrained-Layer Damping
J. Eng. Ind. November 1967, 89(4): 773–782.
doi: https://doi.org/10.1115/1.3610152
Topics:
Damping
,
Composite materials
,
Laminates
,
Plate theory
,
Plates (structures)
,
Vibration
,
Viscoelastic materials
Calculations and Experiments on the Unbalance Response of a Flexible Rotor
J. Eng. Ind. November 1967, 89(4): 785–796.
doi: https://doi.org/10.1115/1.3610155
Joint Interface Layer Damping
J. Eng. Ind. November 1967, 89(4): 797–805.
doi: https://doi.org/10.1115/1.3610156
Topics:
Damping
,
Adhesives
,
Plates (structures)
,
Shear (Mechanics)
,
Viscoelastic materials
The Influence of Trapped Fluids on High Speed Rotor Vibration
J. Eng. Ind. November 1967, 89(4): 806–812.
doi: https://doi.org/10.1115/1.3610157
Topics:
Fluids
,
Rotor vibration
,
Whirls
,
Rotors
,
Cavities
,
Vibration
,
Fluid films
,
Resonance
,
Cavity walls
,
Computation
Oil Whip Whirl Orbits of a Rotor in Sleeve Bearings
J. Eng. Ind. November 1967, 89(4): 813–823.
doi: https://doi.org/10.1115/1.3610159
Topics:
Plain bearings
,
Rotors
,
Whirls
,
Bearings
,
Fluid films
,
Equations of motion
,
Equilibrium (Physics)
,
Fluid-dynamic forces
,
Limit cycles
,
Nonlinear equations
Study of Flow-Induced Vibrations of a Plate in Narrow Channels
J. Eng. Ind. November 1967, 89(4): 824–830.
doi: https://doi.org/10.1115/1.3610162
Topics:
Channel flow
,
Failure
,
Flow (Dynamics)
,
Flow-induced vibrations
,
Oscillations
,
Rocket engines
,
Springs
,
Vibration
Surface and Wake Flow Phenomena of the Vortex-Excited Oscillation of a Circular Cylinder
J. Eng. Ind. November 1967, 89(4): 831–838.
doi: https://doi.org/10.1115/1.3610163
Topics:
Circular cylinders
,
Oscillations
,
Vortices
,
Wakes
,
Cylinders
,
Acoustics
,
Design
,
Geometry
,
Pressure transducers
,
Reynolds number
Parametric Coupling in a Nonlinear Electromechanical System
J. Eng. Ind. November 1967, 89(4): 839–847.
doi: https://doi.org/10.1115/1.3610164
Topics:
Circuits
,
Computers
,
Cylinders
,
Excitation
,
Oscillations
,
Vibration
Discussions
Discussion: “Deceleration of an Unbalanced Rotor Through a Critical Speed” (Bodger, W. K., 1967, ASME J. Eng. Ind., 89, pp. 582–585)
J. Eng. Ind. November 1967, 89(4): 585.
doi: https://doi.org/10.1115/1.3610114
Topics:
Rotors
Closure to “Discussion of ‘Deceleration of an Unbalanced Rotor Through a Critical Speed’” (1967, ASME J. Eng. Ind., 89, p. 585)
J. Eng. Ind. November 1967, 89(4): 585–586.
doi: https://doi.org/10.1115/1.3610115
Topics:
Rotors
Discussion: “Natural Frequencies in Annuli With Induced Thermal Membrane Stresses” (Mote, Jr., C. D., 1967, ASME J. Eng. Ind., 89, pp. 611–617)
J. Eng. Ind. November 1967, 89(4): 618.
doi: https://doi.org/10.1115/1.3610120
Closure to “Discussion of ‘Natural Frequencies in Annuli With Induced Thermal Membrane Stresses’” (1967, ASME J. Eng. Ind., 89, p. 618)
J. Eng. Ind. November 1967, 89(4): 618.
doi: https://doi.org/10.1115/1.3610121
Discussion: “An Investigation of an Impact Vibration Absorber” (Egle, D. M., 1967, ASME J. Eng. Ind., 89, pp. 653–657)
J. Eng. Ind. November 1967, 89(4): 658–660.
doi: https://doi.org/10.1115/1.3610128
Topics:
Vibration absorbers
Closure to “Discussion of ‘An Investigation of an Impact Vibration Absorber’” (1967, ASME J. Eng. Ind., 89, pp. 658–660)
J. Eng. Ind. November 1967, 89(4): 660–661.
doi: https://doi.org/10.1115/1.3610129
Topics:
Vibration
Discussion: “Torsional Instability of Fully Stalled Airfoil (or Supercavitating Hydrofoil)” (Natesh, M. S., 1967, ASME J. Eng. Ind., 89, pp. 671–680)
J. Eng. Ind. November 1967, 89(4): 680–681.
doi: https://doi.org/10.1115/1.3610132
Discussion: “Torsional Instability of Fully Stalled Airfoil (or Supercavitating Hydrofoil)” (Natesh, M. S., 1967, ASME J. Eng. Ind., 89, pp. 671–680)
J. Eng. Ind. November 1967, 89(4): 681.
doi: https://doi.org/10.1115/1.3610133
Closure to “Discussions of ‘Torsional Instability of Fully Stalled Airfoil (or Supercavitating Hydrofoil)’” (1967, ASME J. Eng. Ind., 89, pp. 680–681)
J. Eng. Ind. November 1967, 89(4): 681–682.
doi: https://doi.org/10.1115/1.3610134
Discussion: “Instability of Oil Bearings Due to High Oil Viscosity” (Chen, Y. N., 1967, ASME J. Eng. Ind., 89, pp. 697–704)
J. Eng. Ind. November 1967, 89(4): 705.
doi: https://doi.org/10.1115/1.3610138
Closure to “Discussion of ‘Instability of Oil Bearings Due to High Oil Viscosity’” (1967, ASME J. Eng. Ind., 89, p. 705)
J. Eng. Ind. November 1967, 89(4): 705.
doi: https://doi.org/10.1115/1.3610139
Topics:
Bearings
Closure to “Discussion of ‘The Design and Evaluation of a Supercritical-Speed Helicopter Power-Transmission Shaft’” (1967, ASME J. Eng. Ind., 89, p. 727)
J. Eng. Ind. November 1967, 89(4): 727–728.
doi: https://doi.org/10.1115/1.3610144
Topics:
Design
Discussion: “Vibration Analysis of Shells Using Discrete Mass Techniques” (McGrattan, R. J., and North, E. L., 1967, ASME J. Eng. Ind., 89, pp. 766–771)
J. Eng. Ind. November 1967, 89(4): 771–772.
doi: https://doi.org/10.1115/1.3610150
Topics:
Shells
,
Vibration analysis
Closure to “Discussion of ‘Vibration Analysis of Shells Using Discrete Mass Techniques’” (1967, ASME J. Eng. Ind., 89, pp. 771–772)
J. Eng. Ind. November 1967, 89(4): 772.
doi: https://doi.org/10.1115/1.3610151
Topics:
Shells
,
Vibration analysis
Discussion: “A Quantitative Evaluation of Constrained-Layer Damping” (Yin, T. P., Kelly, T. J., and Barry, J. E., 1967, ASME J. Eng. Ind., 89, pp. 773–782)
J. Eng. Ind. November 1967, 89(4): 783.
doi: https://doi.org/10.1115/1.3610153
Topics:
Damping
Closure to “Discussion of ‘A Quantitative Evaluation of Constrained-Layer Damping’” (1967, ASME J. Eng. Ind., 89, p. 783)
J. Eng. Ind. November 1967, 89(4): 784.
doi: https://doi.org/10.1115/1.3610154
Discussion: “The Influence of Trapped Fluids on High Speed Rotor Vibration” (Ehrich, F. F., 1967, ASME J. Eng. Ind., 89, pp. 806–812)
J. Eng. Ind. November 1967, 89(4): 812.
doi: https://doi.org/10.1115/1.3610158
Topics:
Fluids
,
Rotor vibration
Discussion: “Oil Whip Whirl Orbits of a Rotor in Sleeve Bearings” (Lund, J. W., and Saibel, E., 1967, ASME J. Eng. Ind., 89, pp. 813–823)
J. Eng. Ind. November 1967, 89(4): 823.
doi: https://doi.org/10.1115/1.3610160
Topics:
Plain bearings
,
Rotors
,
Whirls
Closure to “Discussion of ‘Oil Whip Whirl Orbits of a Rotor in Sleeve Bearings’” (1967, ASME J. Eng. Ind., 89, p. 823)
J. Eng. Ind. November 1967, 89(4): 823.
doi: https://doi.org/10.1115/1.3610161
Email alerts
RSS Feeds
Understanding Frugal Engineering for Equity: Exploring Convergence of Biological Designs and Social Innovations
J. Manuf. Sci. Eng (May 2023)
Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance
J. Manuf. Sci. Eng (May 2023)
Optimal process planning for hybrid additive and subtractive manufacturing
J. Manuf. Sci. Eng
