A micro–macro mechanistic approach to damage in short-fiber composites is developed in this paper. At the microscale, a reference aligned fiber composite is considered for the analysis of the damage mechanisms such as matrix cracking and fiber–matrix debonding using the modified Mori–Tanaka model. The associated damage variables are defined, and the stiffness reduction law dependent on these variables is established. The stiffness of a random fiber composite containing random matrix microcracks and imperfect interfaces is then obtained from that of the reference composite, which is averaged over all possible orientations and weighted by an orientation distribution function. The macroscopic response is determined using a continuum damage mechanics approach and finite element analysis. Final failure resulting from saturation of matrix microcracks, fiber pull-out and breakage is modeled by a vanishing element technique. The model is validated using the experimental results found in literature as well as the results obtained for a random chopped fiber glass–vinyl ester system. Acoustic emission techniques were used to quantify the amount and type of damage during quasi-static testing.
Skip Nav Destination
Article navigation
July 2005
Research Papers
A Mechanistic Approach to Matrix Cracking Coupled with Fiber–Matrix Debonding in Short-Fiber Composites
Ba Nghiep Nguyen,
Ba Nghiep Nguyen
Pacific Northwest National Laboratory
, P.O. Box 999, Richland, WA 99352
Search for other works by this author on:
Brian J. Tucker,
Brian J. Tucker
Pacific Northwest National Laboratory
, P.O. Box 999, Richland, WA 99352
Search for other works by this author on:
Mohammad A. Khaleel
Mohammad A. Khaleel
Pacific Northwest National Laboratory
, P.O. Box 999, Richland, WA 99352
Search for other works by this author on:
Ba Nghiep Nguyen
Pacific Northwest National Laboratory
, P.O. Box 999, Richland, WA 99352
Brian J. Tucker
Pacific Northwest National Laboratory
, P.O. Box 999, Richland, WA 99352
Mohammad A. Khaleel
Pacific Northwest National Laboratory
, P.O. Box 999, Richland, WA 99352J. Eng. Mater. Technol. Jul 2005, 127(3): 337-350 (14 pages)
Published Online: March 22, 2005
Article history
Received:
October 11, 2004
Revised:
March 22, 2005
Citation
Nguyen, B. N., Tucker, B. J., and Khaleel, M. A. (March 22, 2005). "A Mechanistic Approach to Matrix Cracking Coupled with Fiber–Matrix Debonding in Short-Fiber Composites." ASME. J. Eng. Mater. Technol. July 2005; 127(3): 337–350. https://doi.org/10.1115/1.1924565
Download citation file:
Get Email Alerts
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)
Related Articles
Low-Temperature Compressive Strength of Glass-Fiber-Reinforced
Polymer Composites
J. Offshore Mech. Arct. Eng (August,1994)
A Constitutive Model for Distributed Microcracking In Titanium Matrix Composite Laminae
J. Eng. Mater. Technol (October,2000)
On Predicting Nucleation of Microcracks Due to Slip-Twin Interactions at Grain Boundaries in Duplex Near γ - Ti Al
J. Eng. Mater. Technol (April,2008)
A Generalized Continuum Formulation for Composite Microcracked Materials and Wave Propagation in a Bar
J. Appl. Mech (November,2010)
Related Proceedings Papers
Related Chapters
In Situ Observations of the Failure Mechanisms of Hydrided Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Experimental Research on Fiber Grating Sensor Acoustic Emission Detection of Rock Material Specimen Failure
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design