The smart sandwich structures have been widely used in the aerospace, automobile, marine, and civil engineering applications. A typical smart sandwich structure is usually comprised of two stiff face skins separated by a thick core with variety of embedded sensors to monitor the performance of the structures. In this study, the smart composite sandwich structure (CSS) samples are fabricated with glass microballoons syntactic foam core and resin infused glass-fiber face skins (with piezoelectric fiber composite sensors (PFCS) embedded inside the resin infused glass-fiber face skins). One of the main concerns associated with embedding sensors inside composite structures is the structural continuity, compatibility, and interface stress concentrations caused by the significant differences in material property between sensor and host structures. PFCS are highly flexible, easily embeddable, highly compatible with composite structures and their manufacturing processes, which makes them ideal for composite health monitoring applications. In this study, in-plane tensile, tension–tension fatigue, short beam shear, and flexural tests are performed to evaluate the effect on strengths/behavior of the CSS samples due to embedded PFCS. Then carefully planned experiments are conducted to investigate the ability of the embedded PFCS to monitor the stress/strain levels and detect damages in CSS using modal analysis technique. The tensile tests show that both the average ultimate strength and the modulus of elasticity of the tested laminate with or without embedded PFCS are within 7% of each other. The stress–life (S-N) curves obtained from fatigue tests indicates that the fatigue lives and strengths with and without the PFCS are close to each other as well. From short beam and flexural test results, it is observed that embedded PFCS leads to a reduction of 5.4% in the short beam strength and 3.6% in flexural strength. Embedded PFCS’s voltage output response under tension–tension fatigue loading conditions has been recorded simultaneously to study their ability to detect the changes in input loading conditions. A linear relationship has been observed between the changes in the output voltage response of the sensor and changes in the input stress amplitude. This means that by constantly monitoring the output response of the embedded PFCS, one could effectively monitor the magnitude of stress/strain acting on the structure. Experiments are also performed to explore the ability of the embedded PFCS to detect the damages in the structures using modal analysis technique. Results from these experiments show that the PFCS are effective in detecting the initiations of damages like delamination inside these composite sandwich structures through changes in natural frequency modes. Hence embedded PFCS could be an effective method to monitor the health of the composite sandwich structures’ in-service conditions.
Skip Nav Destination
e-mail: hkonka1@tigers.lsu.edu
Article navigation
January 2012
Research Papers
On Mechanical Properties of Composite Sandwich Structures With Embedded Piezoelectric Fiber Composite Sensors
Hari P. Konka,
Hari P. Konka
Department of Mechanical Engineering,
e-mail: hkonka1@tigers.lsu.edu
Louisiana State University
, Baton Rouge, LA 70803
Search for other works by this author on:
M. A. Wahab,
M. A. Wahab
Department of Mechanical Engineering,
Louisiana State University
, Baton Rouge, LA 70803
Search for other works by this author on:
K. Lian
K. Lian
Center for Energy and Environmental Studies,
Southern University
, Baton Rouge, LA
70813
Search for other works by this author on:
Hari P. Konka
Department of Mechanical Engineering,
Louisiana State University
, Baton Rouge, LA 70803e-mail: hkonka1@tigers.lsu.edu
M. A. Wahab
Department of Mechanical Engineering,
Louisiana State University
, Baton Rouge, LA 70803
K. Lian
Center for Energy and Environmental Studies,
Southern University
, Baton Rouge, LA
70813J. Eng. Mater. Technol. Jan 2012, 134(1): 011010 (12 pages)
Published Online: December 8, 2011
Article history
Received:
July 6, 2011
Revised:
October 10, 2011
Online:
December 8, 2011
Published:
December 8, 2011
Citation
Konka, H. P., Wahab, M. A., and Lian, K. (December 8, 2011). "On Mechanical Properties of Composite Sandwich Structures With Embedded Piezoelectric Fiber Composite Sensors." ASME. J. Eng. Mater. Technol. January 2012; 134(1): 011010. https://doi.org/10.1115/1.4005349
Download citation file:
Get Email Alerts
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Related Articles
Mechanical Properties of Flat Braided Composites With a Circular Hole
J. Eng. Mater. Technol (October,2000)
Statistical Characterization of Ultrasonic Additive Manufacturing Ti/Al Composites
J. Eng. Mater. Technol (October,2010)
Analytical and Experimental Studies of Short-Beam Interlaminar Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures
J. Eng. Mater. Technol (January,2001)
Flexural Fatigue of Unbalanced Glass-Carbon Hybrid Composites
J. Sol. Energy Eng (November,2014)
Related Chapters
Layer Arrangement Impact on the Electromechanical Performance of a Five-Layer Multifunctional Smart Sandwich Plate
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation
Research on Strengthening Mechanism of Plant Root in Slope Protection
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design