Volume 116 Issue 2 | J. Eng. Mater. Technol.

Skip Nav Destination

Volume 116, Issue 2

April 1994

ISSN 0094-4289

EISSN 1528-8889

Research Papers

Creep, Stress Relaxation and Biaxial Ratchetting of Type 304 Stainless Steel After Cyclic Preloading

Hiromasa Ishikawa, Katsuhiko Sasaki

J. Eng. Mater. Technol. April 1994, 116(2): 133–141. doi: https://doi.org/10.1115/1.2904263

Abstract

View articletitled, Creep, Stress Relaxation and Biaxial Ratchetting of Type 304 Stainless Steel After Cyclic Preloading

Open the PDF for in another window

Topics: Creep , Relaxation (Physics) , Stainless steel , Stress , Plasticity , Aeroelasticity , Constitutive equations , Cycles , Shear (Mechanics) , Shear stress

A Constitutive Model for Anisotropic Creep Deformation

M. Kawai

J. Eng. Mater. Technol. April 1994, 116(2): 142–147. doi: https://doi.org/10.1115/1.2904264

Abstract

View articletitled, A Constitutive Model for Anisotropic Creep Deformation

Open the PDF for in another window

Topics: Anisotropy , Constitutive equations , Creep , Stress , Hardening , Engineering simulation , Flow (Dynamics) , Kinematics , Metals , Simulation

Yield Surface for Grey Cast Iron Under Biaxial Stress

H. E. Hjelm

J. Eng. Mater. Technol. April 1994, 116(2): 148–154. doi: https://doi.org/10.1115/1.2904265

Abstract

View articletitled, Yield Surface for Grey Cast Iron Under Biaxial Stress

Open the PDF for in another window

Topics: Cast iron , Stress , Deformation , Graphite , Hardening

On the Propagation of a Shear Band in a Steel Tube

R. C. Batra, Xiangtong Zhang

J. Eng. Mater. Technol. April 1994, 116(2): 155–161. doi: https://doi.org/10.1115/1.2904266

Abstract

View articletitled, On the Propagation of a Shear Band in a Steel Tube

Open the PDF for in another window

Topics: Shear (Mechanics) , Steel , Torsion

Holographic Inspection of Plates Containing Areas of Localized Thickness Variation

H. M. Shang, M. Lwin, T. E. Tay

J. Eng. Mater. Technol. April 1994, 116(2): 162–167. doi: https://doi.org/10.1115/1.2904267

Abstract

View articletitled, Holographic Inspection of Plates Containing Areas of Localized Thickness Variation

Open the PDF for in another window

Topics: Inspection , Plates (structures) , Diffraction patterns , Displacement , Holography , Pressure

A Fatigue Crack Growth Model for Single Overload Tests

H. S. Goel, Satish Chand

J. Eng. Mater. Technol. April 1994, 116(2): 168–172. doi: https://doi.org/10.1115/1.2904268

Abstract

View articletitled, A Fatigue Crack Growth Model for Single Overload Tests

Open the PDF for in another window

Topics: Cycles , Fatigue cracks , Fracture (Materials) , Stress

A Yield Surface Approach to the Estimation of Notch Strains for Proportional and Nonproportional Cyclic Loading

M. E. Barkey, D. F. Socie, K. J. Hsia

J. Eng. Mater. Technol. April 1994, 116(2): 173–180. doi: https://doi.org/10.1115/1.2904269

Abstract

View articletitled, A Yield Surface Approach to the Estimation of Notch Strains for Proportional and Nonproportional Cyclic Loading

Open the PDF for in another window

Topics: Anisotropy , Fatigue , Finite element methods , Geometry , Materials properties , Plasticity , Steel , Strain gages , Stress , Tension

Fatigue Growth Analysis of an Inclined Crack Under Uniaxial Cyclic Loading in Materials With Different Yield Strengths in Tension and Compression

Xiangqiao Yan, Weisheng Lei

J. Eng. Mater. Technol. April 1994, 116(2): 181–186. doi: https://doi.org/10.1115/1.2904270

Abstract

View articletitled, Fatigue Growth Analysis of an Inclined Crack Under Uniaxial Cyclic Loading in Materials With Different Yield Strengths in Tension and Compression

Open the PDF for in another window

Topics: Compression , Fatigue , Fracture (Materials) , Tension , Fatigue cracks , Density , Displacement , Boundary element methods , Stress

Experimental Characterization of the Elastic-Plastic Strain Fields at the Crack Tip Due to Cyclic Loading

N. Ranganathan, K. Jendoubi, N. Merah

J. Eng. Mater. Technol. April 1994, 116(2): 187–192. doi: https://doi.org/10.1115/1.2904271

Abstract

View articletitled, Experimental Characterization of the Elastic-Plastic Strain Fields at the Crack Tip Due to Cyclic Loading

Open the PDF for in another window

Topics: Experimental characterization , Fracture (Materials) , Aluminum alloys , Deformation , Fracture mechanics , Gages , Stress , Theoretical analysis

Influence of Weld Discontinuities on Strain Controlled Fatigue Behavior of 308 Stainless Steel Weld Metal

K. Bhanu Sankara Rao, M. Valsan, R. Sandhya, S. L. Mannan, P. Rodriguez

J. Eng. Mater. Technol. April 1994, 116(2): 193–199. doi: https://doi.org/10.1115/1.2904273

Abstract

View articletitled, Influence of Weld Discontinuities on Strain Controlled Fatigue Behavior of 308 Stainless Steel Weld Metal

Open the PDF for in another window

Topics: Fatigue , Metals , Stainless steel , Porosity , Slags , Welded joints , Fracture (Materials) , Arc welding , Base metals , Crack propagation

Thermally Induced Fields in Electroelastic Composite Materials: Average Fields and Effective Behavior

M. L. Dunn

J. Eng. Mater. Technol. April 1994, 116(2): 200–207. doi: https://doi.org/10.1115/1.2904274

Abstract

View articletitled, Thermally Induced Fields in Electroelastic Composite Materials: Average Fields and Effective Behavior

Open the PDF for in another window

Topics: Composite materials , Thermal expansion , Computation , Fibers , Geometry , Particulate matter

Creep Behavior of a Unidirectional SCS-6/Ti-15-3 Metal Matrix Composite at 450°C

N. Ohno, K. Toyoda, N. Okamoto, T. Miyake, S. Nishide

J. Eng. Mater. Technol. April 1994, 116(2): 208–214. doi: https://doi.org/10.1115/1.2904275

Abstract

View articletitled, Creep Behavior of a Unidirectional SCS-6/Ti-15-3 Metal Matrix Composite at 450°C

Open the PDF for in another window

Topics: Creep , Metal matrix composites , Fibers , Stress , Brittleness , Ductility , Elongation , Gages , Relaxation (Physics) , Rupture

The Effect of Matrix Microstructure on Thermally Induced Residual Stresses in SiC/Titanium Aluminide Composites

Marek-Jerzy Pindera, Alan D. Freed

J. Eng. Mater. Technol. April 1994, 116(2): 215–221. doi: https://doi.org/10.1115/1.2904276

Abstract

View articletitled, The Effect of Matrix Microstructure on Thermally Induced Residual Stresses in SiC/Titanium Aluminide Composites

Open the PDF for in another window

Topics: Composite materials , Residual stresses , Titanium aluminide , Fibers , Cylinders , Brittleness , Microcracks , Modeling , Temperature , Thermal stresses

Deformation and Failure Behavior of Woven Composite Laminates

M. Karayaka, P. Kurath

J. Eng. Mater. Technol. April 1994, 116(2): 222–232. doi: https://doi.org/10.1115/1.2904277

Abstract

View articletitled, Deformation and Failure Behavior of Woven Composite Laminates

Open the PDF for in another window

Topics: Deformation , Failure , Laminates , Woven composites , Failure mechanisms , Anisotropy , Composite materials , Compression , Epoxy adhesives , Epoxy resins

Local Buckling and Failure of Pultruded Fiber-Reinforced Plastic Beams

L. C. Bank, M. Nadipelli, T. R. Gentry

J. Eng. Mater. Technol. April 1994, 116(2): 233–237. doi: https://doi.org/10.1115/1.2904278

Abstract

View articletitled, Local Buckling and Failure of Pultruded Fiber-Reinforced Plastic Beams

Open the PDF for in another window

Topics: Buckling , Failure , Fiber reinforced plastics , Pultrusion , Stress , Compression , Flanges , Glass , Polyester fabrics , Composite materials

Analysis and Compression Testing of 2024 and 8009 Aluminum Alloy Zee-Stiffened Panels

R. Friedman, J. Kennedy, D. Royster

J. Eng. Mater. Technol. April 1994, 116(2): 238–243. doi: https://doi.org/10.1115/1.2904279

Abstract

View articletitled, Analysis and Compression Testing of 2024 and 8009 Aluminum Alloy Zee-Stiffened Panels

Open the PDF for in another window

Topics: Aluminum alloys , Compression , Testing , Skin , Aluminum , Buckling , Alloys , High temperature , Stress , Temperature

Dynamic Modeling and Control of Packing Pressure in Injection Molding

J. Hu, J. H. Vogel

J. Eng. Mater. Technol. April 1994, 116(2): 244–249. doi: https://doi.org/10.1115/1.2904280

Abstract

View articletitled, Dynamic Modeling and Control of Packing Pressure in Injection Molding

Open the PDF for in another window

Topics: Dynamic modeling , Injection molding , Packing (Shipments) , Packings (Cushioning) , Pressure , Closed loop systems , Control equipment , Dynamic models , Poles (Building) , Pressure control

A Finite Element Analysis of Electromagnetic Forming for Tube Expansion

Sung Ho Lee, Dong Nyung Lee

J. Eng. Mater. Technol. April 1994, 116(2): 250–254. doi: https://doi.org/10.1115/1.2904281

Abstract

View articletitled, A Finite Element Analysis of Electromagnetic Forming for Tube Expansion

Open the PDF for in another window

Topics: Deformation , Displacement , Electromagnetic fields , Finite element analysis , Finite element methods , Pressure

Errata

Erratum: “On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy” (Journal of Engineering Materials and Technology, 116, pp. 35–44)

A. Abdul-Latif, M. Claval, V. Ferney, K. Saanouni

J. Eng. Mater. Technol. April 1994, 116(2): 192. doi: https://doi.org/10.1115/1.2904272

View articletitled, Erratum: “On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy” (Journal of Engineering Materials and Technology, 116, pp. 35–44)

Open the PDF for in another window

Topics: Modeling , Plasticity

Research Papers

Creep, Stress Relaxation and Biaxial Ratchetting of Type 304 Stainless Steel After Cyclic Preloading

A Constitutive Model for Anisotropic Creep Deformation

Yield Surface for Grey Cast Iron Under Biaxial Stress

On the Propagation of a Shear Band in a Steel Tube

Holographic Inspection of Plates Containing Areas of Localized Thickness Variation

A Fatigue Crack Growth Model for Single Overload Tests

A Yield Surface Approach to the Estimation of Notch Strains for Proportional and Nonproportional Cyclic Loading

Fatigue Growth Analysis of an Inclined Crack Under Uniaxial Cyclic Loading in Materials With Different Yield Strengths in Tension and Compression

Experimental Characterization of the Elastic-Plastic Strain Fields at the Crack Tip Due to Cyclic Loading

Influence of Weld Discontinuities on Strain Controlled Fatigue Behavior of 308 Stainless Steel Weld Metal

Thermally Induced Fields in Electroelastic Composite Materials: Average Fields and Effective Behavior

Creep Behavior of a Unidirectional SCS-6/Ti-15-3 Metal Matrix Composite at 450°C

The Effect of Matrix Microstructure on Thermally Induced Residual Stresses in SiC/Titanium Aluminide Composites

Deformation and Failure Behavior of Woven Composite Laminates

Local Buckling and Failure of Pultruded Fiber-Reinforced Plastic Beams

Analysis and Compression Testing of 2024 and 8009 Aluminum Alloy Zee-Stiffened Panels

Dynamic Modeling and Control of Packing Pressure in Injection Molding

A Finite Element Analysis of Electromagnetic Forming for Tube Expansion

Errata

Erratum: “On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy” (Journal of Engineering Materials and Technology, 116, pp. 35–44)

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Errata

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only