Topics: Deformation , Finite element analysis , Poisson ratio , Rubber , Stress , Finite element methods , Pressure , Fittings , Tension , Displacement

Crack Initiation and Growth in Solder Joints Under Cyclic Shear Deformation Using Piezomechanical Actuation

Dong-Jin Shim, S. Mark Spearing, Qingda Yang

J. Eng. Mater. Technol. January 2007, 129(1): 19–28. doi: https://doi.org/10.1115/1.2400257

Abstract

View articletitled, Crack Initiation and Growth in Solder Joints Under Cyclic Shear Deformation Using Piezomechanical Actuation

Open the PDF for in another window

Topics: Fracture (Materials) , Piezoelectric ceramics , Shear (Mechanics) , Solder joints , Solders , Shear deformation , Plates (structures)

Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate

Fahmi Zaïri, Moussa Naït-Abdelaziz, Krzysztof Woznica, Jean-Michel Gloaguen

J. Eng. Mater. Technol. January 2007, 129(1): 29–35. doi: https://doi.org/10.1115/1.2400256

Abstract

View articletitled, Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate

Open the PDF for in another window

Topics: Constitutive equations , Polymers , Hardening , Deformation , Rubber , Stress

Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based Forming Limit Curve

C. Hari Manoj Simha, Javad Gholipour, Alexander Bardelcik, Michael J. Worswick

J. Eng. Mater. Technol. January 2007, 129(1): 36–47. doi: https://doi.org/10.1115/1.2400269

Abstract

View articletitled, Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based Forming Limit Curve

Open the PDF for in another window

Topics: Necking , Stress , Computation , Forming limit diagrams , Aluminum alloys , Failure

Study of Bolt Load Loss in Bolted Aluminum Joints

T. Jaglinski, A. Nimityongskul, R. Schmitz, R. S. Lakes

J. Eng. Mater. Technol. January 2007, 129(1): 48–54. doi: https://doi.org/10.1115/1.2400262

Abstract

View articletitled, Study of Bolt Load Loss in Bolted Aluminum Joints

Open the PDF for in another window

Topics: Creep , Stress , Temperature , Aluminum , Relaxation (Physics) , Engines

Using In Situ Atomic Force Microscopy to Investigate the Kinetics of Corrosion of WC–Co–Cr Cermet Coatings Applied by High-Velocity Oxy-Fuel

V. A. D. Souza, A. Neville

J. Eng. Mater. Technol. January 2007, 129(1): 55–68. doi: https://doi.org/10.1115/1.2400258

Abstract

View articletitled, Using In Situ Atomic Force Microscopy to Investigate the Kinetics of Corrosion of WC–Co–Cr Cermet Coatings Applied by High-Velocity Oxy-Fuel

Open the PDF for in another window

Topics: Atomic force microscopy , Coatings , Corrosion , Cermets , Polarization (Electricity) , Polarization (Light) , Polarization (Waves) , Oxidation

Development of Short Fiber-Reinforced $Ni Ti ∕ Al 6061$ Composite

C. L. Xie, M. Hailat, X. Wu, G. Newaz, M. Taya, B. Raju

J. Eng. Mater. Technol. January 2007, 129(1): 69–76. doi: https://doi.org/10.1115/1.2400271

Abstract

View articletitled, Development of Short Fiber-Reinforced <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi mathvariant="normal">Ni</mi><mi mathvariant="normal">Ti</mi><mo>∕</mo><mi mathvariant="normal">Al</mi><mn>6061</mn></mrow></math> Composite

Open the PDF for in another window

Topics: Composite materials , Fibers , Temperature , Nickel titanium alloys

Residual Elastic Strains in Autofrettaged Tubes: Elastic–Ideally Plastic Model Analysis

Alexander M. Korsunsky

J. Eng. Mater. Technol. January 2007, 129(1): 77–81. doi: https://doi.org/10.1115/1.2400267

Abstract

View articletitled, Residual Elastic Strains in Autofrettaged Tubes: Elastic–Ideally Plastic Model Analysis

Open the PDF for in another window

Topics: Autofrettage , Deformation , Inverse problems , Stress , Yield stress , Neutron diffraction

Methodology for Determining the Variance of the Taylor Factor: Application in $Fe - 3 % Si$

Craig P. Przybyla, Brent L. Adams, Michael P. Miles

J. Eng. Mater. Technol. January 2007, 129(1): 82–93. doi: https://doi.org/10.1115/1.2400268

Abstract

View articletitled, Methodology for Determining the Variance of the Taylor Factor: Application in <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>Fe</mi><mtext>-</mtext><mn>3</mn><mo>%</mo><mi>Si</mi></mrow></math>

Open the PDF for in another window

Topics: Crystals , Deformation , Dimensions , Engineering simulation , Materials properties , Sampling methods , Simulation , Texture (Materials) , Stress , Errors

A Multiscale Analysis of Void Coalescence in Nickel

M. K. Jones, M. F. Horstemeyer, A. D. Belvin

J. Eng. Mater. Technol. January 2007, 129(1): 94–104. doi: https://doi.org/10.1115/1.2400265

Abstract

View articletitled, A Multiscale Analysis of Void Coalescence in Nickel

Open the PDF for in another window

Topics: Engineering simulation , Finite element analysis , Nickel , Simulation , Stress , Damage

Characterization of Polypropylene Nanocomposite Structures

K. Kanny, V. K. Moodley

J. Eng. Mater. Technol. January 2007, 129(1): 105–112. doi: https://doi.org/10.1115/1.2400264

Abstract

View articletitled, Characterization of Polypropylene Nanocomposite Structures

Open the PDF for in another window

Topics: Nanocomposites , Nanoclays , Polymers

Some Aspects on Hot Forging Features of P/M Sintered High-Strength Titanium Carbide Composite Steel Preforms Under Different Stress State Conditions

R. Narayanasamy, V. Senthilkumar, K. S. Pandey

J. Eng. Mater. Technol. January 2007, 129(1): 113–129. doi: https://doi.org/10.1115/1.2400261

Abstract

View articletitled, Some Aspects on Hot Forging Features of P/M Sintered High-Strength Titanium Carbide Composite Steel Preforms Under Different Stress State Conditions

Open the PDF for in another window

Topics: Density , Steel , Stress , Poisson ratio , Forging

Effect of Atomization Method on the Morphology of Spray-Generated Particles

Morteza Eslamian, Nasser Ashgriz

J. Eng. Mater. Technol. January 2007, 129(1): 130–142. doi: https://doi.org/10.1115/1.2400270

Abstract

View articletitled, Effect of Atomization Method on the Morphology of Spray-Generated Particles

Open the PDF for in another window

Topics: Drops , Drying , Magnesium (Metal) , Nozzles , Particulate matter , Sprays , Pressure

Effect of Strain Gage Length When Determining Residual Stress by Slitting

Matthew J. Lee, Michael R. Hill

J. Eng. Mater. Technol. January 2007, 129(1): 143–150. doi: https://doi.org/10.1115/1.2400263

Abstract

View articletitled, Effect of Strain Gage Length When Determining Residual Stress by Slitting

Open the PDF for in another window

Topics: Strain gages , Stress , Polynomials , Gages , Errors

Experimental and Theoretical Analysis on Formability of Aluminum Tailor-Welded Blanks

M. Jie, C. H. Cheng, L. C. Chan, C. L. Chow, C. Y. Tang

J. Eng. Mater. Technol. January 2007, 129(1): 151–158. doi: https://doi.org/10.1115/1.2400274

Abstract

View articletitled, Experimental and Theoretical Analysis on Formability of Aluminum Tailor-Welded Blanks

Open the PDF for in another window

Topics: Aluminum , Base metals , Blanks , Finite element analysis , Forming limit diagrams , Necking , Simulation , Mechanical properties

A Statistical Methodolgy for the Preparation of a Competing Modes Fatigue Design Curve

Gerald T. Cashman

J. Eng. Mater. Technol. January 2007, 129(1): 159–168. doi: https://doi.org/10.1115/1.2401619

Abstract

View articletitled, A Statistical Methodolgy for the Preparation of a Competing Modes Fatigue Design Curve

Open the PDF for in another window

Topics: Fatigue , Simulation , Failure , Fatigue design , Stress , Design , Probability

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy

J. Eng. Mater. Technol (April 2025)

Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam

J. Eng. Mater. Technol (April 2025)

Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study

J. Eng. Mater. Technol (July 2025)

Tensile, Flexural, and Fatigue Responses of Lightweight Pumice-Reinforced Magnesium Composite: Experimentation Followed by an Analytical Modeling

J. Eng. Mater. Technol (July 2025)

Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components

J. Eng. Mater. Technol (April 2025)

Technical Papers

Studies on the Effect of Cyclic Loading on Grain Boundary Rupture Time

Mixed Finite Element Analysis of Elastomeric Butt-Joints

Crack Initiation and Growth in Solder Joints Under Cyclic Shear Deformation Using Piezomechanical Actuation

Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate

Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based Forming Limit Curve

Study of Bolt Load Loss in Bolted Aluminum Joints

Using In Situ Atomic Force Microscopy to Investigate the Kinetics of Corrosion of WC–Co–Cr Cermet Coatings Applied by High-Velocity Oxy-Fuel

Development of Short Fiber-Reinforced $Ni Ti ∕ Al 6061$ Composite

Residual Elastic Strains in Autofrettaged Tubes: Elastic–Ideally Plastic Model Analysis

Methodology for Determining the Variance of the Taylor Factor: Application in $Fe - 3 % Si$

A Multiscale Analysis of Void Coalescence in Nickel

Characterization of Polypropylene Nanocomposite Structures

Some Aspects on Hot Forging Features of P/M Sintered High-Strength Titanium Carbide Composite Steel Preforms Under Different Stress State Conditions

Effect of Atomization Method on the Morphology of Spray-Generated Particles

Effect of Strain Gage Length When Determining Residual Stress by Slitting

Experimental and Theoretical Analysis on Formability of Aluminum Tailor-Welded Blanks

A Statistical Methodolgy for the Preparation of a Competing Modes Fatigue Design Curve

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only