The stiffness matrix of angular contact ball bearings is calculated by using the analytical approach in which the summation of ball-race loads is replaced by an integration. The matrix connected to the conventional model in two degrees of freedom is first presented. A practical application of this formulation is illustrated through the common problem of sizing a two bearings-shaft arrangement. Variations of displacements, axial forces, and bearing fatigue life related to preload are shown to be easily obtained. Then, the matrix connected to the model in five degrees of freedom is given. This may be coupled with finite elements which are generally used to model the shaft or the housing. [S1050-0472(00)01801-8]

Issue Section:
Technical Papers
Keywords:
machine bearings, bending strength, design engineering, fatigue, matrix algebra, mechanical contact
Topics:
Ball bearings, Bearings, Stiffness, Stress, Fatigue life
1.
International Standards Organization, 1991, International Standard ISO 281/1, “Rolling Bearings-Dynamic Load Ratings and Rating Life-Part 1, Calculation methods.”
2.
Houpert, L., 1995, “Prediction of Bearing, Gear and Housing Performances,” Proceedings of the Rolling Bearing Practice Today Seminar, I. Mech. E., London, February 1995.
3.
Houpert
,
L.
,
1997
, “
A Uniform Analytical Approach for Ball and Roller Bearings Calculations
,”
ASME J. Tribol.
,
119
, pp.
851
–
858
.
4.
Palmgren, A., 1959, Ball and Roller Bearing Engineering, Burkbank.
5.
Sjova¨ll, H., 1933, “The Load Distribution Within Ball and Roller Bearings Under Given External Radial and Axial Load,” Tek. Tidskrift, Mek., h. 9.
6.
Jones
,
A. B.
,
1960
, “
A General Theory of Elasticity Constrained Ball and Radial Roller Bearings under Arbitrary Load and Speed Conditions
,”
ASME J. Basic Eng.
,
82
, pp.
309
–
320
.
7.
Andreason
,
S.
,
1973
, “
Load Distribution in a Taper Roller Bearing Arrangement Considering Misalignment
,”
Tribology
,
6
, pp.
84
–
92
.
8.
De Mul
,
J. M.
,
Vree
,
J. M.
, and
Maas
,
D. A.
,
1989
, “
Equilibrium and Associated Load Distribution in Ball and Roller Bearings Loaded in Five Degree of Freedom While Neglecting Friction-Part I: General Theory and Application to Ball Bearings
,”
ASME J. Tribol.
,
111
, pp.
142
–
148
.
9.
Harris, T. A., 1991, Rolling Bearing Analysis, Third Edition, Wiley, New York.
Copyright © 2000
 by ASME
You do not currently have access to this content.