Optical and magnetic encoders are widely used to measure joint angles. These sensors are required to be installed at the axes of rotation (joint centers). However, microelectromechanical system (MEMS) accelerometer and gyroscope-based joint angle measurement sensors possess the advantage of being flexible with regard to the point of installation. Inertial measurement units (IMUs) are capable of providing orientation and are also used for joint angle estimation. They conventionally fuse gyroscope and accelerometer data using Kalman filter-like algorithm to estimate the joint angles. This research presents a novel approach of measuring joint parameters—joint angles, angular velocities, and accelerations, of two links joined by revolute or universal joint. The gravity-invariant vestibular dynamic inclinometer (VDI) and planar VDI (pVDI) are used on each link to measure the joint parameters of links joined by revolute and universal joints, respectively. The VDI consists of two dual-axis accelerometers and an uniaxial gyroscope, while the pVDI consists of four strategically placed dual-axis accelerometers and a triaxial gyroscope. The measurements of joint parameters using the presented algorithms are independent of integration errors/drift, do not require knowledge of robot dynamics, and are computationally less burdensome.
Skip Nav Destination
Article navigation
April 2016
Research-Article
Joint Angle Measurement Using Strategically Placed Accelerometers and Gyroscope
Vishesh Vikas,
Vishesh Vikas
Center of Intelligent Machines
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: vishesh.vikas@gmail.com
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: vishesh.vikas@gmail.com
Search for other works by this author on:
Carl D. Crane, III
Carl D. Crane, III
Center of Intelligent Machines
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: carl.crane@gmail.com
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: carl.crane@gmail.com
Search for other works by this author on:
Vishesh Vikas
Center of Intelligent Machines
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: vishesh.vikas@gmail.com
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: vishesh.vikas@gmail.com
Carl D. Crane, III
Center of Intelligent Machines
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: carl.crane@gmail.com
and Robotics (CIMAR),
Department of Mechanical and
Aerospace Engineering,
University of Florida,
Gainesville, FL 32611
e-mail: carl.crane@gmail.com
1Current affiliation: Postdoctoral Researcher, Neuromechanics and Biomimetic Devices Laboratory, Tufts University, Meford MA 02155.
Manuscript received November 26, 2014; final manuscript received July 25, 2015; published online November 24, 2015. Assoc. Editor: Jaydev P. Desai.
J. Mechanisms Robotics. Apr 2016, 8(2): 021003 (7 pages)
Published Online: November 24, 2015
Article history
Received:
November 26, 2014
Revised:
July 25, 2015
Accepted:
July 26, 2015
Citation
Vikas, V., and Crane, C. D., III (November 24, 2015). "Joint Angle Measurement Using Strategically Placed Accelerometers and Gyroscope." ASME. J. Mechanisms Robotics. April 2016; 8(2): 021003. https://doi.org/10.1115/1.4031299
Download citation file:
Get Email Alerts
Cited By
Special Issue: Selected Papers from IDETC-CIE 2022
J. Mechanisms Robotics
Motion Modelling of a 5-Axis Delta Robot with Telescopic Shafts
J. Mechanisms Robotics
A Variable Stiffness Sole for Biped Robot and its Experimental Verification
J. Mechanisms Robotics
Related Articles
A Redundant Accelerometric Cluster for the Measurement of Translational and Angular Acceleration and Angular Velocity of the Head
J. Med. Devices (March,2007)
Special Section: 2022 IMECE Papers
Letters Dyn. Sys. Control (October,2022)
Robust Design of Inertial Measurement Units Based on Accelerometers
J. Dyn. Sys., Meas., Control (May,2009)
Production Line Calibration for Sensors on Actively Controlled Bullets
J. Manuf. Sci. Eng (May,2004)
Related Proceedings Papers
Related Chapters
The Design and Implement of Remote Inclinometer for Power Towers Based on MXA2500G/GSM
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Design and Simulation of a Novel Electrostatic Tunable MEMS Inductor for RF Apllications
International Conference on Computer Engineering and Technology, 3rd (ICCET 2011)
KPCA-Kalman Filtering for the MEMS-SINS/GPS Integrated Navigation System
International Symposium on Information Engineering and Electronic Commerce, 3rd (IEEC 2011)