Robotic surgical tools used in minimally invasive surgeries (MIS) require miniaturized and reliable actuators for precise positioning and control of the end-effector. Miniature pneumatic artificial muscles (MPAMs) are a good choice due to their inert nature, high force to weight ratio, and fast actuation. In this paper, we present the development of miniaturized braided pneumatic muscles with an outer diameter of ∼1.2 mm, a high contraction ratio of about 18%, and capable of providing a pull force in excess of 4 N at a supply pressure of 0.8 MPa. We present the details of the developed experimental setup, experimental data on contraction and force as a function of applied pressure, and characterization of the MPAM. We also present a simple kinematics and experimental data based model of the braided pneumatic muscle and show that the model predicts contraction in length to within 20% of the measured value. Finally, a robust controller for the MPAMs is developed and validated with experiments and it is shown that the MPAMs have a time constant of ∼10 ms thereby making them suitable for actuating endoscopic and robotic surgical tools.
Experimental Characterization and Control of Miniaturized Pneumatic Artificial Muscle
Manuscript received November 7, 2013; final manuscript received August 13, 2014; published online October 13, 2014. Assoc. Editor: Venketesh Dubey.
- Views Icon Views
- Share Icon Share
- Search Site
Chakravarthy, S., Aditya, K., and Ghosal, A. (October 13, 2014). "Experimental Characterization and Control of Miniaturized Pneumatic Artificial Muscle." ASME. J. Med. Devices. December 2014; 8(4): 041011. https://doi.org/10.1115/1.4028420
Download citation file: