Abstract

This paper presents an analytical formulation and a finite element analysis of the behavior of multilayer unbonded flexible risers. The finite element model accurately incorporates all the fine details of the riser that were previously considered to be important but too difficult to simulate due to the significant associated computational cost. All layers of the riser are separately modeled, and contact interaction between layers has been accounted for. The model includes geometric nonlinearity as well as frictional effects. The analysis considers the main modes of flexible riser loading, which include internal and external pressures, axial tension, torsion, and bending. Computations were performed by employing a fully explicit time integration scheme on a parallel 16-processor cluster of computers. Consistency of simulation results was demonstrated by comparison with those of the analytical model of an identical structure. The close agreement gives confidence in both approaches.

1.
Knapp
,
R. H.
, 1979, “
Derivation of a New Stiffness Matrix for Helically Armored Cables Considering Tension and Torsion
,”
Int. J. Numer. Methods Eng.
0029-5981,
14
(
4
), pp.
515
529
.
2.
McConnell
,
K. G.
, and
Zemke
,
W. P.
, 1982, “
A Model to Predict the Coupled Axial Torsion Properties of ACSR Electrical Conductors
,”
Exp. Mech.
0014-4851,
22
(
7
), pp.
237
244
.
3.
Lanteigne
,
J.
, 1985, “
Theoretical Estimation of the Response of Helically Armored Cables to Tension, Torsion, and Bending
,”
ASME J. Appl. Mech.
,
52
(
2
), pp.
423
432
. 0021-8936
4.
Claydon
,
P.
,
Cook
,
G.
,
Brown
,
P. A.
, and
Chandwani
,
R.
, 1992, “
A Theoretical Approach to Prediction of Service Life of Unbonded Flexible Pipes Under Dynamic Loading Conditions
,”
Mar. Struct.
,
5
(
5
), pp.
399
429
. 0951-8339
5.
Kraincanic
,
I.
, and
Kebadze
,
E.
, 2001, “
Slip Initiation and Progression in Helical Armoring Layers of Unbonded Flexible Pipes and Its Effect on Pipe Bending Behavior
,”
J. Strain Anal. Eng. Des.
0309-3247,
36
(
3
), pp.
265
275
.
6.
Kebadze
,
E.
, 2000, “
Theoretical Modeling of Unbonded Flexible Pipe Cross-Sections
,” Ph.D. thesis, South Bank University, London, UK.
7.
Bahtui
,
A.
,
Bahai
,
H.
, and
Alfano
,
G.
, 2008, “
A Finite Element Analysis for Unbonded Flexible Risers Under Torsion
,”
ASME J. Offshore Mech. Arct. Eng.
0892-7219,
130
(
4
), p.
041301
.
8.
Bahtui
,
A.
,
Bahai
,
H.
, and
Alfano
,
G.
, 2007, “
Numerical and Analytical Simulation of Unbonded Flexible Risers Subjected to Combined Modes of Loading
,”
Ninth US National Congress on Computational Mechanics
, San Francisco, CA, Jul. 23–26.
9.
Bahtui
,
A.
,
Bahai
,
H.
, and
Alfano
,
G.
, 2008, “
A Finite Element Analysis for Unbonded Flexible Risers Under Axial Tension
,”
Proceedings of the OMAE2008 27th International Conference on Offshore Mechanics and Arctic Engineering
, Estoril, Portugal, Jun. 15–20.
10.
Bahtui
,
A.
,
Bahai
,
H.
, and
Alfano
,
G.
, 2008, “
Constitutive Modeling of Unbonded Flexible Risers Under Tension
,”
Eighth World Congress on Computational Mechanics (WCCM8-ECCOMAS 2008)
, Venice, Italy, Jun. 30–Jul. 5.
11.
Knupp
,
P. M.
, 2000, “
Achieving Finite Element Mesh Quality via Optimization of the Jacobian Matrix Norm and Associated Quantities
,”
Int. J. Numer. Methods Eng.
0029-5981,
48
(
8
), pp.
1165
1185
.
12.
Harte
,
A. M.
, and
McNamara
,
J. F.
, 1993, “
Modeling Procedures for the Stress Analysis of Flexible Pipe Cross Sections
,”
ASME J. Offshore Mech. Arct. Eng.
0892-7219,
115
(
1
), pp.
46
51
.
13.
McNamara
,
J. F.
, and
Harte
,
A. M.
, 1989, “
Three Dimensional Analytical Simulation of Flexible Pipe Wall Structure
,”
The 18th International Conference on Offshore Mechanics and Arctic Engineering
, The Hague, Mar. 19–23, pp.
477
482
.
14.
ABAQUS Theory Manual, ABAQUS, Version 6.6 Documentation, 2007.
15.
Saevik
,
S.
, and
Berge
,
S.
, 1995, “
Fatigue Testing and Theoretical Studies of Two 4 in. Flexible Pipes
,”
Eng. Struct.
0141-0296,
17
(
4
), pp.
276
292
.
You do not currently have access to this content.