Skip Nav Destination
Volumes
Research Papers
Manufacturing Strategies to Mitigate Deformation Twinning in Magnesium
Shelby Rustom, YubRaj Paudel, Shiraz Mujahid, Matthew Cagle, Prathmesh Anantwar, Kavan Hazeli, Robert Moser, Bhasker Paliwal, Hongjoo Rhee, Haitham El Kadiri, Christopher D. Barrett
ASME Open J. Engineering. January 2023, 2: 021001.
doi: https://doi.org/10.1115/1.4056553
Topics:
Deformation
,
Magnesium (Metal)
,
Plating
,
Twinning
,
Nucleation (Physics)
,
Stress
,
Magnesium alloys
,
Manufacturing
,
Ductility
The Importance of Transparency in Regulation
ASME Open J. Engineering. January 2023, 2: 021002.
doi: https://doi.org/10.1115/1.4056536
Topics:
Transparency
,
Safety
Effects of Panel Misalignment in a Deployable Origami-Based Optical Array
ASME Open J. Engineering. January 2023, 2: 021003.
doi: https://doi.org/10.1115/1.4056475
Topics:
Sensors
,
Simulation
,
Telescopes
,
Design
Explosion Differentiation Using Light Emissions—Nuclear Reactor, Steam, Water Hammer, Hydrogen, Piper Alpha, and Hydro-Volcanic Explosions
ASME Open J. Engineering. January 2023, 2: 021004.
doi: https://doi.org/10.1115/1.4056472
Topics:
Explosions
,
Water hammer
,
Hydrogen
,
Pipes
Electroencephalogram Experimentation to Understand Creativity of Mechanical Engineering Students
ASME Open J. Engineering. January 2023, 2: 021005.
doi: https://doi.org/10.1115/1.4056473
Topics:
Creativity
,
Electroencephalography
,
Electrodes
,
Machine learning
,
Signals
Pressure Signal-Based Analysis of Anomalies in Switching Behavior of a Two-Way Directional Control Valve
ASME Open J. Engineering. January 2023, 2: 021006.
doi: https://doi.org/10.1115/1.4056474
Topics:
Dimensions
,
Fractals
,
Pressure
,
Signals
,
Valves
,
Artificial neural networks
A Comparison of Industrial-Scale Radiometer Heat Flux Measurements Between Pulverized-Coal and Coal/Biomass Co-Firing Combustion
ASME Open J. Engineering. January 2023, 2: 021007.
doi: https://doi.org/10.1115/1.4056537
Topics:
Biomass
,
Boilers
,
Coal
,
Co-firing
,
Flames
,
Fuels
,
Heat flux
,
Radiation (Physics)
,
Power stations
,
Calibration
Performance Assessment of Chemical Kinetics Neural Ordinary Differential Equations in Pairwise Mixing Stirred Reactor
ASME Open J. Engineering. January 2023, 2: 021008.
doi: https://doi.org/10.1115/1.4056476
Topics:
Chemical kinetics
,
Chemistry
,
Combustion
,
Differential equations
,
Errors
,
Particulate matter
,
Simulation
,
Temperature
,
Stiffness
,
Scalars
Water Relief Through Safety or Relief Valves is not Just a Leak
ASME Open J. Engineering. January 2023, 2: 021009.
doi: https://doi.org/10.1115/1.4056619
Topics:
Accidents
,
Emergency core cooling systems
,
Flow (Dynamics)
,
Leakage
,
Platform supply vessels
,
Safety
,
Water
,
Relief valves
,
Pressure
A 3-D Printed Optically Clear Rigid Diseased Carotid Bifurcation Arterial Mock Vessel Model for Particle Image Velocimetry Analysis in Pulsatile Flow
ASME Open J. Engineering. January 2023, 2: 021010.
doi: https://doi.org/10.1115/1.4056639
Experimental and Numerical Investigation of Lauric Acid Melting at Suboptimal Inclines
ASME Open J. Engineering. January 2023, 2: 021011.
doi: https://doi.org/10.1115/1.4056348
Topics:
Density
,
Melting
,
Temperature
,
Containers
,
Computer simulation
,
Enthalpy
Part Change Management: A Case Study on Automotive Engineering and Production; Domestic and International Perspectives
ASME Open J. Engineering. January 2023, 2: 021012.
doi: https://doi.org/10.1115/1.4056813
Topics:
Change management
,
Manufacturing
,
Design
Offshore Logistics: Scenario Planning and Installation Modeling of Floating Offshore Wind Projects
ASME Open J. Engineering. January 2023, 2: 021013.
doi: https://doi.org/10.1115/1.4056882
Topics:
Ocean engineering
,
Wind
,
Vessels
,
Logistics
,
Wind farms
,
Manufacturing
,
Modeling
Research on Electromagnetic Interference Protection of Nuclear Power Unit Equipment Under the Application of New Wireless Technology in Smart Nuclear Power
ASME Open J. Engineering. January 2023, 2: 021014.
doi: https://doi.org/10.1115/1.4056814
Determination of Microcystis aeruginosa Concentration Using Two Discrete Wavelengths
ASME Open J. Engineering. January 2023, 2: 021015.
doi: https://doi.org/10.1115/1.4056964
Topics:
Absorption
,
Design
,
Wavelength
,
Teams
,
Sensors
,
Calibration
Drag Reduction for Flow Past Circular Cylinder Using Static Extended Trailing Edge
Ayush Boral, Souvik Dutta, Anwesha Das, Ankit Kumar, Nilotpala Bej, Pooja Chaubdar, Biranchi Narayana Das, Atal Bihari Harichandan
ASME Open J. Engineering. January 2023, 2: 021016.
doi: https://doi.org/10.1115/1.4057009
Real-Time Hybrid Testing of a Floating Offshore Wind Turbine Using a Surrogate-Based Aerodynamic Emulator
Edward J. Ransley, Scott A. Brown, Emma C. Edwards, Tom Tosdevin, Kieran Monk, Alastair M. Reynolds, Deborah Greaves, Martyn R. Hann
ASME Open J. Engineering. January 2023, 2: 021017.
doi: https://doi.org/10.1115/1.4056963
Topics:
Floating wind turbines
,
Hardware
,
Testing
,
Thrust
,
Waves
,
Wind
,
Stress
,
Feedback
,
Simulation
,
Shorelines
Laser Forming of Compliant Mechanisms
ASME Open J. Engineering. January 2023, 2: 021018.
doi: https://doi.org/10.1115/1.4057048
Topics:
Compliant mechanisms
,
Lasers
,
Design
,
Manufacturing
,
Metals
Validation Study of a Computer-Aided Design Augmentation Tool for Cost Estimation
ASME Open J. Engineering. January 2023, 2: 021019.
doi: https://doi.org/10.1115/1.4062110
Topics:
Computer-aided design
,
Design
,
Manufacturing
,
Modeling
,
Performance
,
Design for Manufacturing
,
Feedback
Systematic Assessment of the Two-Step, One-Way Coupled Method for Computational Fluid Dynamics
ASME Open J. Engineering. January 2023, 2: 021020.
doi: https://doi.org/10.1115/1.4062111
Topics:
Boundary-value problems
,
Computational fluid dynamics
,
Errors
,
Flow (Dynamics)
,
Geometry
,
Simulation
,
Design
Medical Device Hybrid Manufacturing: Translating the Coordinate System From Metal Additive Manufacturing to Subtractive Post-Processing
Justin T. Suriano, Angelantonio Tafuni, Lewis Mullen, Joseph Racanelli, Robert Tarantino, Samuel C. Lieber
ASME Open J. Engineering. January 2023, 2: 021021.
doi: https://doi.org/10.1115/1.4062187
Topics:
Additive manufacturing
,
Design
,
Electrical discharge machining
,
Manufacturing
,
Medical devices
,
Metals
,
Wire
,
Machining
,
Flanges
,
Finishes
A Data-Driven Framework for Computationally Efficient Integration of Chemical Kinetics Using Neural Ordinary Differential Equations
ASME Open J. Engineering. January 2023, 2: 021022.
doi: https://doi.org/10.1115/1.4062105
Topics:
Artificial neural networks
,
Chemical kinetics
,
Differential equations
,
Errors
,
Hydrogen
,
Pressure
,
Temperature
,
Combustion
,
Simulation
,
Stiffness
Insight Into Recompression Brayton Cycle
ASME Open J. Engineering. January 2023, 2: 021023.
doi: https://doi.org/10.1115/1.4062258
Topics:
Brayton cycle
,
Cycles
,
Entropy
,
Pressure
,
Temperature
,
Turbines
,
Exergy
,
Thermodynamics
,
Low temperature
Investigation of the Interfacial Adhesion Strength of Parts Additively Manufactured on Fabrics
ASME Open J. Engineering. January 2023, 2: 021024.
doi: https://doi.org/10.1115/1.4062281
Topics:
Additive manufacturing
,
Adhesion
,
Temperature
,
Testing
,
Textiles
Modeling and Design of Hinged Tile-Based Curling Air Surface for Morphing Windshield Cowling
ASME Open J. Engineering. January 2023, 2: 021025.
doi: https://doi.org/10.1115/1.4062220
A Comparative Study of the Conventional Poppet Valve and the Proposed Novel Independent Rotary Valve Configurations for Improving Efficiency of the Internal Combustion Engine
ASME Open J. Engineering. January 2023, 2: 021026.
doi: https://doi.org/10.1115/1.4062280
Low-Cost and Rapid Shaping of Nitinol for Medical Device Prototyping
Mighten C. Yip, Seyedhamidreza Alaie, Eva A. Romito, Tejas Doshi, Amir Ali Amiri Moghadam, Bobak Mosadegh, Simon Dunham
ASME Open J. Engineering. January 2023, 2: 021027.
doi: https://doi.org/10.1115/1.4062282
Topics:
Heat
,
Nickel titanium alloys
,
Wire
,
Stents
,
Ceramics
,
Additive manufacturing
,
Medical devices
,
Design
,
Rapid prototyping
,
Manufacturing
Method to Establish Sound and Acceleration Levels of High Pressure Reducing Valves
ASME Open J. Engineering. January 2023, 2: 021028.
doi: https://doi.org/10.1115/1.4062346
Topics:
High pressure (Physics)
,
Pipes
,
Valves
,
Vibration
,
Sound pressure
Multi-Objective Optimization and Tradespace Analysis of a Mechanical Clock Movement Design
ASME Open J. Engineering. January 2023, 2: 021029.
doi: https://doi.org/10.1115/1.4062410
Topics:
Clocks
,
Design
,
Optimization
,
Pendulums
,
Q-factor
,
Genetic algorithms
Techno-Economic Investigation of Geothermal Development in Sedimentary Basins
ASME Open J. Engineering. January 2023, 2: 021030.
doi: https://doi.org/10.1115/1.4062412
Topics:
Drilling
,
Economics
,
Geothermal engineering
,
Geothermal power
,
Temperature
,
Wells
Comparison of Operation and Maintenance of Floating 14 MW Turbines and Twin 10 MW Turbines
ASME Open J. Engineering. January 2023, 2: 021031.
doi: https://doi.org/10.1115/1.4062413
Topics:
Maintenance
,
Turbines
,
Vessels
,
Simulation
Mechanical Characterization of Porcine Tricuspid Valve Anterior Leaflets Over Time: Applications to Ex Vivo Studies
ASME Open J. Engineering. January 2023, 2: 021032.
doi: https://doi.org/10.1115/1.4062477
Topics:
Biological tissues
,
Biomechanics
,
Mechanical testing
,
Stress
,
Valves
,
Physiology
,
Stiffness
Email alerts
RSS Feeds
Mechanical Characterization of Porcine Tricuspid Valve Anterior Leaflets Over Time: Applications to Ex Vivo Studies
ASME Open J. Engineering (January 2023)
Comparison of Operation and Maintenance of Floating 14 MW Turbines and Twin 10 MW Turbines
ASME Open J. Engineering (January 2023)
Techno-Economic Investigation of Geothermal Development in Sedimentary Basins
ASME Open J. Engineering (January 2023)
Method to Establish Sound and Acceleration Levels of High Pressure Reducing Valves
ASME Open J. Engineering (January 2023)
Multi-Objective Optimization and Tradespace Analysis of a Mechanical Clock Movement Design
ASME Open J. Engineering (January 2023)
