Abstract

Recently, tube-to-tube wear indications of triangular tube bundle steam generators (SGs) caused by fluidelastic instability (FEI) in the in-plane direction of U-bend region (in-plane FEI) have been reported. Several experiments were conducted to investigate the characteristics of in-plane FEI by our research groups. In a series of experiments, particular characteristics of in-plane FEI were found. For example, there are the critical velocity difference between the in-plane and the out-of-plane directions, the difference between straight tube bundle tests and U-bend tube bundle tests, etc. To explain these characteristics, unsteady fluid force acting on tubes were measured. The experimental investigation was conducted under high temperature and high-pressure steam–water flow conditions close to the SGs. Stability analyses were conducted using the measured unsteady fluid forces as inputs. First, stability analyses were done to simulate straight tube bundle tests. Analysis results agreed well with experiments and it could explain the effect on critical velocity trend by number of flexible tubes and directions of vibration. Second, U-tube stability analyses were performed by applying unsteady fluid force coefficients for each location of U-bend tube finite element method (FEM) model. From the results, mechanisms of in-plane FEI were understood.

References

1.
Southern California Edison,
2012
, “
San Onofre Nuclear Generating Station Unit 2 Return to Service Report
,” Nuclear Regulatory Commission, Washington, DC, Document No.
ML12285A263
, pp.
1
54
.https://www.nrc.gov/docs/ML1228/ML12285A263.pdf
2.
Connors
,
H. J.
,
1970
, “
Fluidelastic Vibration of Tube Arrays Excited by Cross Flow
,” ASME Symposium on Flow-Induced Vibration in Heat Exchanger, Winter Annual Meeting, 42–47, 1970.
3.
Weaver
,
D. S.
, and
Schneider
,
W.
,
1983
, “
The Effect of Flat Bar Supports on the Crossflow Induced Response of Heat Exchanger U-Tubes
,”
ASME J. Eng. Power
,
105
(
4
), pp.
775
781
.10.1115/1.3227481
4.
Taylor
,
C. E.
,
Boucher
,
K. M.
, and
Yetisir
,
M.
,
1995
, “
Vibration and Impact Forces Due to Two-Phase Cross Flow in U-Bend Region of Nuclear Steam Generators
,”
Proceedings Sixth International Conference on Flow-Induced Vibration, London, UK
, Apr. 10–12, pp.
404
411
.
5.
Mureithi
,
N. W.
,
Zhang
,
C.
,
Ruël
,
M.
, and
Pettigrew
,
M. J.
,
2004
, “
Fluidelastic Instability Tests on an Array of Tubes Preferentially Flexible in the Flow Direction
,”
J. Fluids Struct.
, 21(1), pp. 75–87.10.1016/j.jfluidstructs.2005.03.010
6.
Janzen
,
V. P.
,
Hagberg
,
E. G.
,
Pettigrew
,
M. J.
, and
Taylor
,
C. E.
,
2005
, “
Fluidelastic Instability and Work-Rate Measurements of Steam-Generator U-Tubes in Air–Water Cross-Flow
,”
ASME J. Pressure Vessel Technol.
,
127
(
1
), pp.
84
91
.10.1115/1.1849229
7.
Khalvatti
,
A.
,
Mureithi
,
N. W.
, and
Pettigrew
,
M. J.
,
2010
, “
Effect of Preferential Flexibility Direction on Fluidelastic Instability of a Rotated Triangular Tube Bundle
,”
ASME J. Pressure Vessel Technol.
,
132
(
4
), p.
041309
.10.1115/1.4002181
8.
Sawadogo
,
T.
, and
Mureithi
,
N.
,
2013
, “
Time Domain Simulation of the Vibration of a Steam Generator Tube Subjected to Fluidelastic Forces Induced by Two-Phase Cross-Flow
,”
ASME J. Pressure Vessel Technol.
,
135
(
3
), p.
030905
.10.1115/1.4023426
9.
Hassan
,
M.
, and
Weaver
,
D. S.
,
2015
, “
The Effect of Flat Bar Supports on Streamwise Fluidelastic Instability in Heat Exchanger Tube Arrays
,”
ASME J. Pressure Vessel Technol.
,
137
(
6
), p.
061302
.10.1115/1.4029973
10.
Nakamura
,
T.
,
Fujita
,
Y.
,
Sumitani
,
T.
, and
Hagiwara
,
S.
,
2013
, “
Study on in-Flow Fluidelastic Instability of Circular Cylinders Caused by Air Cross Flow (Triangular Arrays)
,”
ASME
Paper No. PVP2013-97111.10.1115/PVP2013-97111
11.
Price
,
S. J.
,
1995
, “
A Review of Theoretical Models for Fluidelasitc Instability of Cylinder Arrays in Cross Flow
,”
J. Fluids Struct.
,
9
(
5
), pp.
463
518
.10.1006/jfls.1995.1028
12.
Paidoussis
,
M. P.
,
1987
, “
Flow Induced Instabilities of Cylindrical Structures
,”
ASME Appl. Mech. Rev.
,
40
(
2
), pp.
163
175
.10.1115/1.3149530
13.
Lever
,
J. H.
, and
Weaver
,
D. S.
,
1982
, “
A Theoretical Model for Fluid-Elastic Instability in Heat Exchanger Tube Bundles
,”
ASME J. Pressure Vessel Technol.
,
104
(
3
), pp.
147
158
.10.1115/1.3264196
14.
Sawadogo
,
T.
, and
Mureithi
,
N.
,
2014
, “
Fluidelastic Instability Study in a Rotated Triangular Tube Array Subject to Two-Phase Cross-Flow—Part I: Fluid Force Measurements and Time Delay Extraction
,”
J. Fluids Struct.
,
49
, pp.
1
15
.10.1016/j.jfluidstructs.2014.02.004
15.
Tanaka
,
H.
, and
Takahara
,
S.
,
1981
, “
Fluid Elastic Vibration of Tube Array in Cross Flow
,”
J. Sound Vib.
,
77
(
1
), pp.
19
37
.10.1016/S0022-460X(81)80005-3
16.
Azuma
,
S.
,
Morita
,
H.
,
Hirota
,
K.
,
Kondo
,
Y.
,
Utsumi
,
S.
,
Komuro
,
Y.
,
Kawakami
,
R.
,
Nariai
,
T.
, and
Nishikawa
,
Y.
,
2018
, “
Investigation of Critical Flow Velocity of a Triangular U-Tube Bundle Subjected to Two-Phase Flow
,”
Proceedings of the Ninth International Symposium on Fluid-Structure Interactions
, Toronto, ON, Canada, July 8–11, Paper No. FIV2018-148.
17.
Azuma
,
S.
,
Morita
,
H.
,
Hirota
,
K.
,
Kondo
,
Y.
,
Utsumi
,
S.
,
Komuro
,
Y.
,
Kawakami
,
R.
, and
Nariai
,
T.
,
2020
, “
Investigation of Critical Flow Velocity of a Triangular U-Tube Bundle Subjected to Two-Phase Flow
,”
ASME J. Pressure Vessel Technol.
,
142
(
2
), p.
021401
.10.1115/1.4045992
18.
Chen
,
S. S.
,
1983
, “
Instability Mechanisms and Stability Criteria of a Group of Circular Cylinders Subjected to Cross-Flow—Part 1: Theory
,”
ASME J. Vib. Acoust., Stress, Reliab.
,
105
(
1
), pp.
52
58
.10.1115/1.3269066
19.
Chen
,
S. S.
,
1983
, “
Instability Mechanisms and Stability Criteria of a Group of Circular Cylinders Subjected to Cross-Flow—Part 2: Numerical Results and Discussions
,”
ASME J. Vib. Acoust., Stress, Reliab.
,
105
(
2
), pp.
253
260
.10.1115/1.3269095
You do not currently have access to this content.