A drag force reduction experiment is performed on polyoxyethylene (PEO) water solution using a rotary rheometer. Longitudinal, transverse, and isotropic grooves are notched on the rotor’s surface to investigate the effect of surface roughness patterns. The experiment results show that higher drag force is generated on the surface with transverse grooves compared with the drag force on a smooth surface, while lower drag force is generated on the surface with longitudinal grooves. The drag force on the surface with isotropic grooves is between them. Forces on the side wall of the grooves play important roles in drag force reduction. They are numerically analyzed based on the Navier-Stokes equation using the finite volume method. The viscous force on the groove’s bottom plane is far less than the force on the corresponding plane of the smooth surface, but the drag force on the groove’s surface is compensated either by the pressure drag on the side walls of the transverse groove or by the viscous force on the side walls of the longitudinal groove. The pressure drag on side wall of transverse groove is always higher than the viscous force on side wall of longitudinal groove. The numerical results cope with the experiment results that only the surface with longitudinal grooves can reduce the drag force.
Investigation on Effect of Surface Roughness Pattern to Drag Force Reduction Using Rotary Rheometer
- Views Icon Views
- Share Icon Share
- Search Site
Haosheng, C., Darong, C., and Yongjian, L. (September 16, 2005). "Investigation on Effect of Surface Roughness Pattern to Drag Force Reduction Using Rotary Rheometer." ASME. J. Tribol. January 2006; 128(1): 131–138. https://doi.org/10.1115/1.2125969
Download citation file: