Skip Nav Destination
Issues
October 1997
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
Thermal Elastohydrodynamic Lubrication of Non-Newtonian Fluids With Rough Surfaces
J. Tribol. October 1997, 119(4): 605–612.
doi: https://doi.org/10.1115/1.2833856
Topics:
Elastohydrodynamic lubrication
,
Non-Newtonian fluids
,
Surface roughness
,
Algorithms
,
Fluids
,
Pressure
,
Shear flow
,
Flow (Dynamics)
,
Lubricants
,
Rheology
Tribological Study of Chemical States of Protective Oxide Film Formed on Steel After Sliding in Humid Atmosphere and in Aqueous Solutions
J. Tribol. October 1997, 119(4): 613–617.
doi: https://doi.org/10.1115/1.2833857
Influence of Mechanical and Chemical Factors on Transition Between Severe and Mild Wear in Saline Solution
J. Tribol. October 1997, 119(4): 619–625.
doi: https://doi.org/10.1115/1.2833860
Topics:
Wear
,
Oxygen
,
Cathodic protection
,
Stress
,
Carbon steel
,
Disks
,
Risk
,
Wear testing
Rheological Models for Stick-Slip Behavior
J. Tribol. October 1997, 119(4): 626–631.
doi: https://doi.org/10.1115/1.2833861
Topics:
Rheology
,
Stick-slip
,
Surface roughness
,
Fluids
Apparent Multi-Valued Friction in Lubricated Contact Systems From Tangential Dynamics
J. Tribol. October 1997, 119(4): 632–636.
doi: https://doi.org/10.1115/1.2833862
A Numerical Solution of a Surface Crack Under Cyclic Hydraulic Pressure Loading
J. Tribol. October 1997, 119(4): 637–645.
doi: https://doi.org/10.1115/1.2833863
Dynamic Stability and Spacing Modulation of Sub-25 nm Fly Height Sliders
J. Tribol. October 1997, 119(4): 646–652.
doi: https://doi.org/10.1115/1.2833864
Topics:
Dynamic stability
,
Air bearings
,
Stiffness
,
Dynamics (Mechanics)
,
Inertia (Mechanics)
,
Disks
,
Simulation
,
Surface roughness
,
Design
,
Impulse (Physics)
Derivation of Rarefaction-Modified Reynolds Equation Considering Porosity of Thin Lubricant Film
J. Tribol. October 1997, 119(4): 653–659.
doi: https://doi.org/10.1115/1.2833865
Topics:
Lubricants
,
Porosity
,
Lubrication
,
Permeability
,
Disks
,
Magnetic heads
,
Pressure gradient
Three-Dimensional Residual Stress Effects on the Fatigue Crack Initiation in Rails
J. Tribol. October 1997, 119(4): 660–666.
doi: https://doi.org/10.1115/1.2833866
Topics:
Fatigue cracks
,
Rails
,
Stress
,
Steel
,
Finite element methods
,
Hardening
,
Kinematics
,
Residual stresses
,
Steady state
Characterization of Adhesive Strength of Phosphate Coatings in Cold Metal Forming
J. Tribol. October 1997, 119(4): 667–671.
doi: https://doi.org/10.1115/1.2833867
Topics:
Adhesives
,
Metalworking
,
Phosphate coatings
,
Friction
,
Deformation
,
Lubrication
,
Galling
,
Geometry
,
Shapes
,
Surface roughness
Stability of Sliding in a System Excited by a Rough Moving Surface
J. Tribol. October 1997, 119(4): 672–680.
doi: https://doi.org/10.1115/1.2833868
Topics:
Stability
,
Surface roughness
,
Resonance
,
Friction
,
Damping
,
Oscillations
Flying Height Measurement on Al2O3 Film of a Magnetic Slider
J. Tribol. October 1997, 119(4): 681–686.
doi: https://doi.org/10.1115/1.2833869
Topics:
Disks
,
Reflectometers
Development and Optimization of Carbide-Reinforced Tools and Application to Hot Rolling of Stainless Steel
J. Tribol. October 1997, 119(4): 687–693.
doi: https://doi.org/10.1115/1.2833870
Topics:
Hot rolling
,
Optimization
,
Stainless steel
,
Particulate matter
,
Coatings
,
Design
,
Ductility
,
Fracture toughness
,
Galling
,
Metals
Experimental Evaluation of a Steady-State Model for the Wear of Particle-Filled Polymer Composite Materials
J. Tribol. October 1997, 119(4): 694–699.
doi: https://doi.org/10.1115/1.2833871
Topics:
Particulate matter
,
Polymer composites
,
Steady state
,
Wear
,
Fillers (Materials)
,
Composite materials
,
Stress
,
Copper
,
Pressure
Apparatus for Extensional Viscosity Measurements
J. Tribol. October 1997, 119(4): 700–703.
doi: https://doi.org/10.1115/1.2833872
Topics:
Cylinders
,
Deflection
,
Electrical resistance
,
Fluids
,
Inks
,
Pressure
,
Pressure transducers
,
Printing
,
Shear (Mechanics)
,
Shear rate
Survey of Experimental Data for Fixed Geometry Hydrodynamic Journal Bearings
J. Tribol. October 1997, 119(4): 704–710.
doi: https://doi.org/10.1115/1.2833874
Topics:
Geometry
,
Journal bearings
,
Bearings
Three-Dimensional Flow and Pressure Patterns in a Hydrostatic Journal Bearing Pocket
J. Tribol. October 1997, 119(4): 711–719.
doi: https://doi.org/10.1115/1.2833875
Topics:
Flow (Dynamics)
,
Hydrostatics
,
Journal bearings
,
Pressure
,
Fluids
,
Laminar flow
,
Navier-Stokes equations
Bouncing Vibration and Complete Tracking Conditions of a Contact Recording Slider Model on a Harmonic Wavy Disk Surface
J. Tribol. October 1997, 119(4): 720–725.
doi: https://doi.org/10.1115/1.2833876
Topics:
Disks
,
Vibration
,
Collisions (Physics)
,
Damping
,
Design
,
Separation (Technology)
,
Stiffness
,
Stress
A Random Model for Micro-Slip Between Nominally Flat Surfaces
J. Tribol. October 1997, 119(4): 726–732.
doi: https://doi.org/10.1115/1.2833877
Topics:
Deformation
,
Stress
,
Surface roughness
,
Tangential loading
Thermohydrodynamic Design Charts for Slider Bearings
J. Tribol. October 1997, 119(4): 733–740.
doi: https://doi.org/10.1115/1.2833878
Topics:
Design
,
Slider bearings
,
Thermohydrodynamics
,
Bearings
,
Temperature
A New Theoretical Model for Analysis of the Fluid Film in the Cavitation Zone of a Journal Bearing
J. Tribol. October 1997, 119(4): 741–746.
doi: https://doi.org/10.1115/1.2833879
Topics:
Cavitation
,
Fluid films
,
Journal bearings
,
Lubricants
,
Pressure
,
Stress
,
Centrifugal force
,
Equilibrium (Physics)
,
Surface tension
The Effects of Number of Balls and Preload on Vibrations Associated With Ball Bearings
J. Tribol. October 1997, 119(4): 747–753.
doi: https://doi.org/10.1115/1.2833880
Topics:
Ball bearings
,
Vibration
,
Bearings
,
Deflection
,
Design
,
Stress
Frictional Analysis of MoS2 Coated Ball Bearings: A Three-Dimensional Finite Element Analysis
J. Tribol. October 1997, 119(4): 754–763.
doi: https://doi.org/10.1115/1.2833881
Topics:
Ball bearings
,
Finite element analysis
,
Bearings
,
Friction
,
Finite element model
,
Instrumentation
,
Stress
Tribo-Electromagnetic Phenomena of Hydrogenated Carbon Films—Tribo-Electrons, -Ions, -Photons, and -Charging
J. Tribol. October 1997, 119(4): 764–768.
doi: https://doi.org/10.1115/1.2833882
Topics:
Carbon films
,
Electrons
,
Ions
,
Photons
,
Hydrogen
,
Particulate matter
,
Diamonds
,
Emissions
,
Friction
,
Plasmas (Ionized gases)
Porosity Modeling of Brush Seals
J. Tribol. October 1997, 119(4): 769–775.
doi: https://doi.org/10.1115/1.2833883
Topics:
Computational fluid dynamics
,
Dimensions
,
Drag (Fluid dynamics)
,
Flow (Dynamics)
,
Leakage flows
,
Modeling
,
Porosity
,
Porous materials
,
Press fits
,
Rotors
Surface Roughness Effects in High-Speed Hydrodynamic Journal Bearings
J. Tribol. October 1997, 119(4): 776–780.
doi: https://doi.org/10.1115/1.2833884
Topics:
Journal bearings
,
Surface roughness
,
Turbulence
,
Bearings
,
Computation
,
Flow (Dynamics)
,
Lubricants
,
Numerical analysis
,
Pressure
,
Shear flow
The Effect of Asperity Array Geometry on Friction and Pull-Off Force
J. Tribol. October 1997, 119(4): 781–787.
doi: https://doi.org/10.1115/1.2833885
Topics:
Friction
,
Geometry
,
Silicon
,
Atomic force microscopy
,
Platinum
,
Probes
,
Focused ion beams
,
Semiconductor wafers
Experimental and Fracture Mechanics Study of the Pit Formation Mechanism Under Repeated Lubricated Rolling-Sliding Contact: Effects of Reversal of Rotation and Change of the Driving Roller
J. Tribol. October 1997, 119(4): 788–796.
doi: https://doi.org/10.1115/1.2833886
Topics:
Fracture mechanics
,
Rollers
,
Rotation
,
Fracture (Materials)
,
Damage
,
Fatigue
,
Fatigue cracks
,
Fatigue testing
,
Pressure
,
Rolling contact
Finite Element Analysis of Fretting Stresses
J. Tribol. October 1997, 119(4): 797–801.
doi: https://doi.org/10.1115/1.2833887
Topics:
Finite element analysis
,
Stress
,
Tension
,
Fatigue
,
Aircraft
,
Damage
,
Failure mechanisms
,
Fatigue cracks
,
Finite element model
,
Fracture (Materials)
Derivation of Hydrodynamic Bearing Coefficients Using the Minimum Square Method
J. Tribol. October 1997, 119(4): 802–807.
doi: https://doi.org/10.1115/1.2833888
Topics:
Bearings
,
Journal bearings
,
Transients (Dynamics)
,
Equilibrium (Physics)
,
Simulation
A New Approach to Determine Lubrication Regimes of Piston-Ring Assemblies
J. Tribol. October 1997, 119(4): 808–816.
doi: https://doi.org/10.1115/1.2833889
Topics:
Lubrication
,
Piston rings
,
Engines
,
Stress
,
Torque
,
Cylinders
,
Friction
,
Manufacturing
,
Pistons
,
Spark-ignition engine
Raman Measurements of Localized Pressure Variations in Lubricants Above the Glass Transition Pressure
J. Tribol. October 1997, 119(4): 817–822.
doi: https://doi.org/10.1115/1.2833891
Friction and Wear Micromechanisms of Amorphous Carbon Thin Films
J. Tribol. October 1997, 119(4): 823–829.
doi: https://doi.org/10.1115/1.2833892
Topics:
Carbon
,
Friction
,
Micromechanical devices
,
Thin films
,
Wear
,
Carbon films
,
Atomic force microscopy
,
Disks
,
Fluctuations (Physics)
,
Graphite
Friction Force, Contact Resistance, and Lubricant Shear Behavior at the Magnetic Head-Disk Interface During Starting
J. Tribol. October 1997, 119(4): 830–839.
doi: https://doi.org/10.1115/1.2833893
Topics:
Contact resistance
,
Disks
,
Friction
,
Lubricants
,
Shear (Mechanics)
,
Shear stress
,
Stiction
,
Displacement
,
Signals
,
Sliding friction
The Influence of Humidity on the Fretting Wear of Steel Surfaces Using Thin Layer Activation
J. Tribol. October 1997, 119(4): 840–845.
doi: https://doi.org/10.1115/1.2833894
Topics:
Steel
,
Wear
,
Friction
,
Steady state
,
Vibration
Application of Boltzmann Statistical Mechanics in the Validation of the Gaussian Summit-Height Distribution in Rough Surfaces
J. Tribol. October 1997, 119(4): 846–850.
doi: https://doi.org/10.1115/1.2833895
A Uniform Analytical Approach for Ball and Roller Bearings Calculations
J. Tribol. October 1997, 119(4): 851–858.
doi: https://doi.org/10.1115/1.2833896
Topics:
Roller bearings
,
Bearings
,
Stress
,
Finite element analysis
,
Rollers
Performance Analysis of Grease-Lubricated Journal Bearings Including Thermal Effects
J. Tribol. October 1997, 119(4): 859–868.
doi: https://doi.org/10.1115/1.2833897
Topics:
Journal bearings
,
Temperature effects
,
Flow (Dynamics)
,
Bushings
,
Lubrication
,
Thermohydrodynamics
Numerical Simulation of Traction in Rolling/Sliding Contacts
J. Tribol. October 1997, 119(4): 869–874.
doi: https://doi.org/10.1115/1.2833898
Topics:
Computer simulation
,
Traction
,
Shear stress
,
Stress
,
Fluid films
,
Numerical analysis
Dynamics of Machine Tool Spindle/Bearing Systems Under Thermal Growth
J. Tribol. October 1997, 119(4): 875–882.
doi: https://doi.org/10.1115/1.2833899
Topics:
Bearings
,
Dynamics (Mechanics)
,
Machine tool spindles
,
Stiffness
,
Dynamic response
,
Heat
,
Thermal expansion
,
Deflection
,
Heat transfer
,
Machining
Discussions
Discussion: “Tribological Study of Chemical States of Protective Oxide Film Formed on Steel After Sliding in Humid Atmosphere and in Aqueous Solutions” (Saito, T., Imada, Y., Sugita, K., and Honda, F., 1997, ASME J. Tribol., 119, pp. 613–617)
J. Tribol. October 1997, 119(4): 617–618.
doi: https://doi.org/10.1115/1.2833858
Discussion: “Rotary Lip Seal Operation With an Ingested Meniscus” (Salant, R. F., 1997, ASME J. Tribol., 119, pp. 205–210)
J. Tribol. October 1997, 119(4): 887.
doi: https://doi.org/10.1115/1.2833901
Discussion: “Rotary Lip Seal Operation With an Ingested Meniscus” (Salant, R. F., 1997, ASME J. Tribol., 119, pp. 205–210)
J. Tribol. October 1997, 119(4): 887–888.
doi: https://doi.org/10.1115/1.2833902
Discussion: “Rotary Lip Seal Operation With an Ingested Meniscus” (Salant, R. F., 1997, ASME J. Tribol., 119, pp. 205–210)
J. Tribol. October 1997, 119(4): 888.
doi: https://doi.org/10.1115/1.2833903
Closure to “Discussion of ‘Rotary Lip Seal Operation With an Ingested Meniscus’” (1997, ASME J. Tribol., 119, pp. 887–888)
J. Tribol. October 1997, 119(4): 888.
doi: https://doi.org/10.1115/1.2833904
Technical Briefs
Orthogonal Shear Stress Amplitude as a Function of Rolling Contact Ellipticity and Depth
J. Tribol. October 1997, 119(4): 883–886.
doi: https://doi.org/10.1115/1.2833900
Topics:
Rolling contact
,
Shear stress