This paper is the second part of a two part paper that reports on the improvement of efficiency of a one and a half stage high work axial flow turbine. The first part covered the design of the endwall profiling, as well as a comparison with steady probe data; this part covers the analysis of the time-resolved flow physics. The focus is on the time-resolved flow physics that leads to a total-to-total stage efficiency improvement of 1.0%±0.4%. The investigated geometry is a model of a high work , axial shroudless HP turbine. The time-resolved measurements have been acquired upstream and downstream of the rotor using a fast response aerodynamic probe (FRAP). This paper contains a detailed analysis of the secondary flow field that is changed between the axisymmetric and the nonaxisymmetric endwall profiling cases. The flowfield at the exit of the first stator is improved considerably due to the nonaxisymmetric endwall profiling and results in reduced secondary flow and a reduction in loss at both hub and tip, as well as a reduced trailing shed vorticity. The rotor has reduced losses and a reduction in secondary flows mainly at the hub. At the rotor exit, the flow field with nonaxisymmetric endwalls is more homogenous due to the reduction in secondary flows in the two rows upstream of the measurement plane. This confirms that nonaxisymmetric endwall profiling is an effective tool for reducing secondary losses in axial turbines. Using a frozen flow assumption, the time-resolved data are used to estimate the axial velocity gradients, which are then used to evaluate the streamwise vorticity and dissipation. The nonaxisymmetric endwall profiling of the first nozzle guide vane show reductions in dissipation and streamwise vorticity due to the reduced trailing shed vorticity. This smaller vorticity explains the reduction in loss at midspan, which is shown in the first part of the two part paper. This leads to the conclusion that nonaxisymmetric endwall profiling also has the potential of reducing trailing shed vorticity.
Skip Nav Destination
e-mail: schuepbach@lec.mavt.ethz.ch
Article navigation
April 2010
Research Papers
Improving Efficiency of a High Work Turbine Using Nonaxisymmetric Endwalls—Part II: Time-Resolved Flow Physics
P. Schüpbach,
P. Schüpbach
Department of Mechanical and Process Engineering, LEC, Laboratory of Energy Conversion,
e-mail: schuepbach@lec.mavt.ethz.ch
ETH Zurich
, 8092 Zurich, Switzerland
Search for other works by this author on:
R. S. Abhari,
R. S. Abhari
Department of Mechanical and Process Engineering, LEC, Laboratory of Energy Conversion,
ETH Zurich
, 8092 Zurich, Switzerland
Search for other works by this author on:
M. G. Rose,
M. G. Rose
Institute of Aeronautical Propulsion,
University of Stuttgart
, 70569 Stuttgart, Germany
Search for other works by this author on:
T. Germain,
T. Germain
MTU Aero Engines GmbH
, Dachauer Strasse 665, 80995 München, Germany
Search for other works by this author on:
I. Raab,
I. Raab
MTU Aero Engines GmbH
, Dachauer Strasse 665, 80995 München, Germany
Search for other works by this author on:
J. Gier
J. Gier
MTU Aero Engines GmbH
, Dachauer Strasse 665, 80995 München, Germany
Search for other works by this author on:
P. Schüpbach
Department of Mechanical and Process Engineering, LEC, Laboratory of Energy Conversion,
ETH Zurich
, 8092 Zurich, Switzerlande-mail: schuepbach@lec.mavt.ethz.ch
R. S. Abhari
Department of Mechanical and Process Engineering, LEC, Laboratory of Energy Conversion,
ETH Zurich
, 8092 Zurich, Switzerland
M. G. Rose
Institute of Aeronautical Propulsion,
University of Stuttgart
, 70569 Stuttgart, Germany
T. Germain
MTU Aero Engines GmbH
, Dachauer Strasse 665, 80995 München, Germany
I. Raab
MTU Aero Engines GmbH
, Dachauer Strasse 665, 80995 München, Germany
J. Gier
MTU Aero Engines GmbH
, Dachauer Strasse 665, 80995 München, GermanyJ. Turbomach. Apr 2010, 132(2): 021008 (10 pages)
Published Online: January 12, 2010
Article history
Received:
July 9, 2008
Revised:
January 27, 2009
Online:
January 12, 2010
Published:
January 12, 2010
Connected Content
A companion article has been published:
Improving Efficiency of a High Work Turbine Using Nonaxisymmetric Endwalls— Part I: Endwall Design and Performance
Citation
Schüpbach, P., Abhari, R. S., Rose, M. G., Germain, T., Raab, I., and Gier, J. (January 12, 2010). "Improving Efficiency of a High Work Turbine Using Nonaxisymmetric Endwalls—Part II: Time-Resolved Flow Physics." ASME. J. Turbomach. April 2010; 132(2): 021008. https://doi.org/10.1115/1.3103926
Download citation file:
Get Email Alerts
Evaluating Thin-Film Thermocouple Performance on Additively Manufactured Turbine Airfoils
J. Turbomach (July 2025)
Related Articles
Investigation of Vortex Shedding and Wake-Wake Interaction in a Transonic Turbine Stage Using Laser-Doppler-Velocimetry and Particle-Image-Velocimetry
J. Turbomach (January,2006)
Unsteady Flow Interactions Within the Inlet Cavity of a Turbine Rotor Tip Labyrinth Seal
J. Turbomach (October,2005)
Optimized Shroud Design for Axial Turbine Aerodynamic Performance
J. Turbomach (July,2008)
Secondary Flows and Loss Caused by Blade Row Interaction in a Turbine Stage
J. Turbomach (July,2006)
Related Proceedings Papers
Related Chapters
Introduction
Turbine Aerodynamics: Axial-Flow and Radial-Flow Turbine Design and Analysis
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential