This paper presents a hybrid vibration isolation system using linearized zero-power control with weight support springs. The isolation system, fundamentally, is developed by linking a mechanical spring in series with a negative stiffness spring realized by zero-power control in order to insulate ground vibration as well as to reject the effect of on-board-generated direct disturbances. In the original system, the table is suspended from the middle table solely by the attractive force produced by the magnets and therefore, the maximum supporting force on the table is limited by the capacity of the permanent magnets used for zero-power control. To meet the growing demand to support heavy payload on the table, the physical model is extended by introducing an additional mechanism-weight support springs, in parallel with the above system. However, the nonlinearity of the zero-power control instigates a nonlinear vibration isolation system, which leads to a deviation from zero compliance to direct disturbance. Therefore, a nonlinear compensator for the zero-power control is employed furthermore to the system to meet the ever-increasing precise disturbance rejection requirements in the hi-technology systems. The fundamental characteristics of the system are explained analytically and the improved control performances are demonstrated experimentally.
Skip Nav Destination
e-mail: mehoque@mech.saitama-u.ac.jp
Article navigation
August 2010
Research Papers
Development of an Active Vibration Isolation System Using Linearized Zero-Power Control With Weight Support Springs
Md. Emdadul Hoque,
Md. Emdadul Hoque
Department of Mechanical Engineering,
e-mail: mehoque@mech.saitama-u.ac.jp
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Search for other works by this author on:
Takeshi Mizuno,
Takeshi Mizuno
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Search for other works by this author on:
Daisuke Kishita,
Daisuke Kishita
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Search for other works by this author on:
Masaya Takasaki,
Masaya Takasaki
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Search for other works by this author on:
Yuji Ishino
Yuji Ishino
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Search for other works by this author on:
Md. Emdadul Hoque
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japane-mail: mehoque@mech.saitama-u.ac.jp
Takeshi Mizuno
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Daisuke Kishita
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Masaya Takasaki
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, Japan
Yuji Ishino
Department of Mechanical Engineering,
Saitama University
, 255 Shimo-Okubo, Sakura-Ku, Saitama 338-8570, JapanJ. Vib. Acoust. Aug 2010, 132(4): 041006 (9 pages)
Published Online: May 25, 2010
Article history
Received:
December 17, 2008
Revised:
December 9, 2009
Online:
May 25, 2010
Published:
May 25, 2010
Citation
Hoque, M. E., Mizuno, T., Kishita, D., Takasaki, M., and Ishino, Y. (May 25, 2010). "Development of an Active Vibration Isolation System Using Linearized Zero-Power Control With Weight Support Springs." ASME. J. Vib. Acoust. August 2010; 132(4): 041006. https://doi.org/10.1115/1.4000968
Download citation file:
Get Email Alerts
Related Articles
Design and Experimental Analysis of Origami-Inspired Vibration Isolator With Quasi-Zero-Stiffness Characteristic
J. Vib. Acoust (October,2017)
Recent Advances in Shock Vibration Isolation: An Overview and Future Possibilities
Appl. Mech. Rev (November,2019)
Analytical and Experimental Investigation of Buckled Beams as Negative Stiffness Elements for Passive Vibration and Shock Isolation Systems
J. Vib. Acoust (June,2014)
Active Vibration Control and Isolation for Micromachined Devices
J. Mech. Des (September,2009)
Related Proceedings Papers
Related Chapters
Dynamical Model and Characteristics Analysis of Air Spring System of Low-Speed Maglev Train
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Supporting Systems/Foundations
Handbook on Stiffness & Damping in Mechanical Design
Specific Device Examples
Magnetic Bearings for Mechanical Cardiac Assist Devices